10% discount
TOCRETOARE Metal Table Legs Heavy Duty, 28”H x 24”W, Metal Furniture Legs for Dining Desk Bench and Coffee Table, Industrial Black DIY Iron Bench Legs, Set of 2
Enhanced Stability : This metal furniture legs set added four independent 2 mm thick, 1.2 inch wide metal plates on both sides to make our metal table legs fit work board more perfectly, which improving stability by 80%. Our upgraded screw-in rubber foot pads allow for height adjustment, preventing table shaking and safeguarding your floors from damage
15% discount
VEVOR Steel Table Legs, 28'' Height 30'' Wide Set of 2, Heavy Duty 3.1'' Square Box Section X Frame
High Quality: Color: Black; Height: 28.4"; Width: 29.9"; Amount: 2; Box Section: 3.15" X 3.15"; Top plate size: 3.9”. These table legs adopts cold rolled steel with sandblasted finished. The surface is sprayed with black powder, compared with other table legs using oil paint finished, it is more durable and can effectively prevent them from cracking, rust and corroding.
VEVOR 28 Inch Adjustable Furniture Legs, Square Reinforced Steel Office Table Legs Set of 2 for DIY, Max Load 1000 lbs Heavy Duty Desk Legs, Quick Instalation & Rich Accessories Legs Black
Exceptional Load Capacity: Our 28-inch table leg, cast from solid steel rods, delivers exceptional strength, supporting up to 1000 pounds. The welded mounting plate enhances durability and structural integrity.
10% discount
ALLCOS Bench Legs 16 Inch Metal Coffee Table Legs Heavy Duty Furniture Desk Chair Legs, Set of 2, Black
【Metal Bench Legs】: Size: 15.75"H x 11.8"W(16" H with pads), Mounted Board Length: 11.8", Mounted Board Width: 3.15",Color: Black, Material: Iron, Weight: 8.5lbs(2 pcs ), Surface Finish: baking finished. Suggest: 1. Check the product size beforehand, the board should be at least 2 inches wider than the product; 2. For the same product in the market, our steel material is thicker and heavier, you can check the weight.
QLLY 28 inch Adjustable Tall Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (White)
Size - Height:28 inches/71.1cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter:2 inches/5cm. Weight: 1.87LB/0.85KG (One Leg).
10% discount
TIEOU Metal Legs for Table V Shape 28" H Tall Metal Black Table Leg Heavy Duty Industrial Desk Legs Set of 2
MADE OF HEAVY DUTY SOLID STEEL--These metal legs brackets made of high quality iron with matte spray paint finish; welded joints are smooth.The Capable weight supports up to 1000 lbs.
KaKaBB Metal Table Legs 28 inch, Dining Table Legs Heavy Duty, DIY Modern Desk Legs, Industrial Furniture Legs Set of 2(28" Height, 23.6" Wide) (Black)
Sturdy & Stable – Heavy-Duty Metal Desk Legs with Crossbar Slot Designed for DIY enthusiasts, the built-in slot allows you to install a horizontal stabilizer bar to prevent wobbling, ensuring rock-solid stability for heavy tables up to 800 lbs.
LCSDLHLSY Table Legs 28 inch, Adjustable Metal Furniture Legs,DIY Computer Desks Legs, Coffee Desks, Dining Table with Floor Protectors.
【Sturdy & Heavy Duty】: These furniture legs are made of strong metal, they are heavy duty,with a weight capacity of up to 800lbs.high temperature curing rust-resistant black powder coating not only keep the iron away from moisture while retaining an industrial feel.The adjustable furniture legs are hand welded directly to the solid square base, more stable than screw connections.
5% discount
QLLY Adjustable Square Table Leg, 24-40 inch, 60-100cm, Home Office Custom DIY Table Legs, Furniture Leg Set (4, Black)
Size: QLLY Adjustable Table Leg has a adjustable lengh of 60, 65, 70, 75, 80, 85, 90, 95, 100 cm. You can adjust the length to 24, 26, 28, 30, 32, 34, 36, 38, 40 Inch. Screw mechanism on the bottom can adjust about 0.78 inch/2cm, mounting plate is about 0.4 inch/1cm height.
HEONITURE Metal Table Legs - Heavy Duty Desk & Furniture Legs, Modern Industrial Set of 2 (28" Height, 23.6" Wide)
HEAVY-DUTY STABILITY FOR YOUR DIY TABLE PROJECT - Tried of wobbly table legs that ruin your handcrafted table? Our 28" alloy steel legs feature a reinforced triangular frame design that supports up to 800 lbs per set . Each leg includes a built-in center channel to accept a custom wood beam for added lateral stability on tables over 6 ft . No more shaky dining experiences.
CHICAURA Heavy Duty Metal Table Legs 28x18 Inch, Modern Industrial Steel Square Frame for DIY Dining Table, Kitchen Table Base, Desk, Console, Supports 1000lbs(True 14-Gauge Steel), Set of 2 (Black)
【Rock-Solid Stability on Any Floor】: Eliminate table wobble for good. Our legs feature upgraded M12 adjustable leveling feet (1.57" range) to ensure perfect balance on uneven floors, protecting them from scratches while keeping your valuable tabletop stable
7% discount
Metal Table Legs 28 inch Height x 17.7 inch Wide with Adjustable Protector Feet, Industrial & Rustic Style Heavy Duty Metal Furniture Legs for Desk/Table, (Bear Up to 800lb), Black, Set of 2
【Height Adjustability & Floor Protection】: The adjustable feet are designed to level the legs by the screw on the bottom(adjustment range:1.2 in), it helps you to get a suitable-height and stable table. The feet's material is great for preventing a wobbly table and protecting the floor from scratching.
QLLY 28 inch Adjustable Metal Furniture Legs, Square Office Table Furniture Leg, Set of 4 (Black)
Size - Height: 28 inches/71cm (with mounting plate), screw mechanism on the bottom can adjust about 0.7 inch/1.8cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 2.42LB/1.1KG (One Leg).
22% discount
Taelakeni 16 Inch Metal Bench Coffee Table Legs, Set of 2, Black
16" H x 11.8" W: 16 inch table legs are prefect for custom bench legs, coffee tables, end table, side tables, TV stands, nightstands and so on
OLBRUS 19.6-Inch Depth Workbench Frame, Height Adjustable 28.5" to 33.8",Set of 4 Metal Table Legs with Floor Protectors, Heavy Duty DIY Furniture Legs for Study Desk（Power Outlets/Rubber Pad）
HEIGHT ADJUSTABLE:This work table leg has a height adjustable design the height range can be from 28.5" to 33.8", to accommodate a variety of wooden furniture.
Niubid 28'' x 14'' H-Shape Industrial Pipe Table Leg Set - Iron Base LegsCoffee & End Tables, Desks, Nightstand - Vintage, Mid-Century Modern Aesthetic - Dark Grey Black Rough Pipes
INDUSTRIAL-STYLE PIPES - Add a modern look to your home or office with our table leg set. The iron-cast finish pipes elevate the aesthetics of your furniture with its edgy, contemporary vibe.
ROCKLER Set of 2 Folding Banquet Table Legs - Sturdy Foldable Table Legs w/Non-Slip Plastic Tips & All-Around Welds - Sleek Black Finish 19 Gauge Steel - 24" W x 29" H Standing Desk Legs
Reliable Support: Replace your damaged table legs or build your own banquet table with our folding table legs; these folding legs for table are made from a 1" diameter and 19 gauge steel tubing and offer dependable strength and durability
5% discount
QLLY Adjustable Metal Table Leg, 24-40 inch, 60-100cm, Home Office DIY Desk Leg, Furniture Leg Set (4, Black)
Size: QLLY Adjustable Table Leg has a adjustable length of 60, 65, 70, 75, 80, 85, 90, 95, 100 cm. You can adjust the length to 24, 26, 28, 30, 32, 34, 36, 38, 40 Inch. Screw mechanism on the bottom can adjust about 0.6 inch/1.5cm, mounting plate is about 0.4 inch/1cm height.
6% discount
FUSHIAIPTC Metal Table Legs 28 Inch, Artistic Heavy Duty Dining Table Base with Suction Cups & Pre-Drilled Holes, Fits Glass Marble Wood Tops, DIY Desk Coffee Table Legs, 1000LBS Capacity, Black
HEAVY DUTY & 1000 LBS CAPACITY: Constructed from premium industrial-grade steel with thickened tube design, these 28-inch metal table legs support up to 1000 lbs combined weight. Powder-coated finish provides 2x scratch resistance vs standard coating, protecting against rust, oxidation, and daily wear — built to last for years.
DorBuphan Folding Adjustable Table Legs 4 PCS, Adjustable Height 22.5”- 34.5” DIY Desk Legs, Foldable Furniture Legs for Outdoor Camper, RV, Coffee Dinner Table, Tabletops, Kitchen
Sturdy & Durable: The adjustable table legs is crafted from sturdy steel with a powder-coated finish protecting against rust and corrosion on surface, ensuring long-lasting performance and resistance
Likapop 16" Metal Bench, Desk and Coffee Table Legs, Heavy Duty Furniture Legs, Black End Table Legs (H16 x W11.8, Set of 2)
DIY Furniture Legs: The Z-shape design makes the table legs more modern and aesthetic, making the structure more solid. You can create more home DIY furniture projects. Perfect for making coffee tables, side tables, end tables, short tables, bench legs, computer desks, workbenchs, nightstands and more
6% discount
Yuleimy Adjustable Table Legs 19-30 Inch, Furniture Legs for Heavy Butcher Block & Garage Workbench, Heavy Duty Metal Desk Legs with 8-Hole Triangular Plates for Zero Wobble, Black
ELIMINATE DESK WOBBLE & STRIPPED SCREWS — Solve the biggest frustration with flimsy desk legs. Our heavy-duty metal table legs feature an exclusive large triangular mounting plate with 8 holes, paired with premium self-tapping screws. Because this design distributes weight perfectly, it prevents legs from ripping out of your MDF tabletop, ensuring extreme stability even at the maximum 30-inch height
KAZAKA Adjustable Table Legs, 20-30 inch for Activity & Office Tables - Set of 4 (Black)
【Adjustable Height Table Legs】:Set of 4 adjustable height table Legs can be adjusted from 52 - 75cm.You can adjust the length to 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, 75 cm.
4 Pack 28 Inch Hairpin Table Legs, Heavy Duty Industrial Metal Furniture Legs 1300LBS Load Capacity, Black Anti-Rust Desk Legs withFloorProtectorsforCoffeeTable DiningTable Nightstand Bench Dresser
【Upgraded Reinforcement & 1300LBS Load Capacity】 28-inch reinforced hairpin table legs feature a 3-leg middle welded iron plate design, which enhances stability significantly. With a maximum load capacity of up to 1300 pounds, these legs effectively prevent bending and deformation, while also beautifying the overall appearance of your furniture—combining practicality and aesthetics perfectly.
QLLY 30 inch Adjustable Tall Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (30 inch, Black)
Size - Height:30 inches/76.2cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter:2 inches/5cm. Weight: 2LB/0.91KG (One Leg).
FUSHIAIPTC Metal Coffee Table Legs 18 Inch, 650LBS with Suction Cups & Pre-Drilled Holes, Fits Glass Marble Wood Tops, for End Table, Coffee Table, Night Stands
AESTHETICALLY PLEASING: Matte's black silky finish creates a modern, and stylish look. Also can restore and repurpose old wood planks to make fantastic industrial rustic furniture
8% discount
FUSHIAIPTC 28 Inch Dinning Table Legs, 25.8" W Desk Legs Set of 2 Heavy Duty Metal Legs for Table, 3.2” Thickened Treatment Modern Table Leg with Adjustable Floor Protector (Trapezoidal)
MORE QUALITY: The table legs are made of 3.2’ metal, table legs are 1.5 times thicker than the standard 2' wide legs, which gives the table legs a stronger support and makes them stronger and more structured
22% discount
Taelakeni 16 Inch Metal Bench Legs, Heavy Duty Coffee Table Legs, Trapezoid
16" H x 11.8" W: 16 inch table legs are prefect for custom bench legs, coffee tables, end table, side tables, TV stands, nightstands and so on
DorBuphan Table Legs Metal 2 PCS, Black Steel Table Legs 28" H x 24" W, Heavy Duty and Stable for DIY Tables, Desks, and Bench
Sturdy Table Legs Details: Height 28 inch, width 24 inch; come with two pcs metal table legs, four pcs stabilizers and eight screws; quick installation and easy operation
Metal Industrial Dining Modern Table Legs Desk Legs Base Cast Iron Welding Wrought Iron Coffee Table Bench Legs Night Stand Office Table 28 inch Triangle Shape Black DIY (1 Set of 2 pcs) 28" H x19.7
RESISTANT TO CORROSION: Baked powder coating surface treatment helps create a uniform, durable finish, makes it resistant to chipping, peeling, and scratching, enabling our product to withstand rainy weather and to be suitable for outdoor use
Benbuoo Folding Adjustable Table Legs 21 to 35 inch, Metal Telescopic Storage Desk Legs for Outdoor Camper, RV, Coffee Dinner Table, Tabletops, Kitchen, DIY Bar Desk, Tablesaw, 2pcs Black
The difference between this product and common table legs is that he has two functions at the same time, both can be retracted to quickly adjust the length, and also can be folded and stored away, suitable for most scenarios.
VEVOR Adjustable Table Legs, 28-43.3 in Steel Furniture Legs, 1200 lbs Max Load Heavy Duty, Quick Installation, Ideal for Home Office Desk DIY, Coffee Dinner Bar Tables, Workbenches, Set of 4, Black
Exceptional Load Capacity: Designed to support up to 1200 lbs / 544 kg, these table legs provide reliable strength for heavy tabletops or large storage builds, helping keep your table stable and maintain its shape over time
VASGOR 28-Inch Heavy-Duty Metal Table Legs (Set of 4), Black Rectangular Design, Furniture Leg for Bench, Coffee Table, DIY Projects – Includes Screws & Floor Protectors (28 in - Black)
Heavy-Duty Steel Construction: Crafted from thick steel with a matte black powder coating — anti-rust, solid, and built to support up to 800 lbs total load. Perfect for desks, benches, cabinets, and tables.
58% discount
Goyugore 28" Hairpin Table Legs: Set of 4 Metal Furniture Legs with Floor Protectors for Nightstand Coffee Table Bench Desk Home DIY Projects Heavy Duty Support Hairpin Table Legs (Antique Copper)
Heavy Duty Solid Steel Construction: Experience unparalleled strength with our hairpin legs made from 0.4" thick cold-rolled steel, featuring a sleek satin black powder-coated finish. Designed for long-lasting durability, these heavy-duty hairpin table legs can support up to 300 lbs, making them perfect for a wide range of furniture projects, including coffee tables, desks, and benches
FUSHIAIPTC Metal Coffee Table Legs, Heavy Duty 18 Inch DIY Geometry Base for Table Furniture Legs for Night Stands, End Table, Bench, TV Stands Matte Black
GEOMETRIC ART TABLE LEGS: Matte dark black silky finish creates an industrial, modern and stylish look. The perfect and sturdy structure combines beauty and practicality. The geometric base design is stronger and more durable than standard 2-leg table leg
Lendpea Metal Table Legs Heavy Duty Square Tube Desk Frame Industrial Dining/Coffee/Computer Table Legs, Set of 2(28"-4X2mm, U-Shape)
Great Size With Strong Capacity- Width 17.7'' x Height 28'', ideal height to sit on. This table lega doesn't take up too much space from your room.
ManyiHome 28Inch Hairpin Table Legs Black Set of 4 Desk Legs，900lbs Load Capacity ， Rodsfor Coffee Table, Night Stand Desk Bench，Desk(28in)
HEAVY-DUTY CONSTRUCTION: Our 28-inch table leg, cast from solid steel rods, delivers exceptional strength, Industrial-grade steel hairpin legs with 3-rod design support up,supporting up to 900 pounds / 408.2kg
JIANZHUO Round Metal Coffee Table Legs,16 Inch Black Iron Dining Table Base Only,Circle End Table Legs
【Includes 3 Adjustment Pads】Three adjustment foot pads are included for use as an additional stabilizer for the shaking table.Also protect the floor from damage.
KaKaBB Metal Desk Legs 28 inch, Heavy Duty Industrial Table Legs with Adjustable Protector Feet, DIY Modern Cast Iron Furniture Legs Set of 2 (28", style1)
Adjustable Feet Pad - A set of foot pad.Use them to protect your floors from damage.Perfect for uneven floors,to make sure that your table legs are always sturdy.
Mdjwjj Industrial Pipe Counter Bar Height Table Leg,Metal Table Legs,Iron Base Legs Coffee Tables, Desks, Nightstand,2Pcs, 38" H × 14" W(Black)
EXCELLENT METAL MATERIAL:H shape frame enlarge the bearing capacity and stability.Pipe desk legs are made of premium material, and with a higher bearing capacity. Coated with industrial grease, tough enough to against rust.
CHICAURA Metal Table Legs, 28" H x 24" W, Heavy-Duty Z-Frame Black Table Base Support up to 1100 lbs, Industrial Modern DIY Furniture Legs for Kitchen Dining, Desk, and Workbench, Set of 2
【Rock-Solid Stability】Say goodbye to wobbles for good! Premium steel Z-shaped legs, laser-welded for strength, eliminate shakiness at its source. Equipped with upgraded M12 leveling feet (1.57-inch adjustment range), they effortlessly handle uneven surfaces, ensuring tabletop stability and protecting your floor—all for your peace of mind
Pilida Adjustable Table Legs 19-30 Inch,Heavy Duty Steel Furniture Legs for DIY Desk/Table/Workbench,Max Load 450lbs - Set of 4
【48-75cm Precision Adjustment】 These adjustable table legs offer adjust height in 2-5cm increments (48/50/52/54/56/58/60/62/64/68/70/72/75cm) for ergonomic desks, kids’ study tables (suitable for users 110-190cm tall), or custom workstations
CHICAURA 40 Inch Bar Height Table Legs 40x20, Heavy Duty Metal Square Frame for DIY Bar, Standing Desk, Upgraded 4.52" Mounting Plate for Stability, Supports 1000lbs (True 14-Gauge), Set of 2, Black
【Designed for Bar & Standing Projects】: Engineered at 40" height specifically for DIY bar tables, pub counters, or standing desks. Ideal for standing work or pairing with standard 28-30" bar stools to create a functional, modern space
QLLY 28 inch Slant Wooden Table Legs, Solid Wood Angled Desk Legs, Furniture Legs, Set of 4, Easy to Install - Perfect for DIY Dining Tables, Coffee Tables, and Benches (Natural, 28")
Size - Height: 28.3 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 0.78 inch/2cm, mounting plate is about 0.4 inch/1cm height. Diameter: 4 inches/10cm.
MBQQ Furniture Legs 28”Height 35”Wide Rustic Decory T Shape Table Legs,Heavy Duty Metal Desk Legs,Dining Table Legs,Industrial Modern, DIY Cast Iron Bench Legs
【Industrial Rustic Style】Restore and repurpose old wood planks to make a fantastic of industrial rustic furniture.
FUSHIAIPTC Heavy Duty Dining Table Base, 30 Inch Metal Leg, Modern Reinforced Steel Office Base, Glass, Wood and Marble Table Tops are All Adaptable
FINE WORKMANSHIP: Our furniture is crafted with high-quality materials. Each table leg undergoes special treatments to enhance moisture resistance and scratch protection, ensuring long-lasting performance
33% discount
Adjustable Table Legs Set of 4, 24"- 40" Heavy Duty Square Adjustable Desk Legs, Easy DIY Installation for Computer, Dining & Work Tables, 220 LB Load Capacity Steel Black Adjustable Furniture Legs
Wide & Precise Height Adjustment: Engineered as fully telescoping table legs, our adjustable legs for table deliver precise adjustable height control (24"-40") - perfect for configuring bar height table legs, counter height table legs, or standard dining table legs; The integrated micro-leveling system ensures perfect stability for tall table legs and adjustable workbench legs on uneven surfaces, while our adjustable square table leg options provide enhanced structural integrity for demanding applications
CHICAURA Counter Height Table Legs 34x24 Inch, Heavy Duty Metal Square Frame for DIY Kitchen Island, Standing Desk, Supports 1000lbs(True 14-Gauge Steel), Industrial Black, Set of 2
【Ergonomic Counter Height for Work & Kitchen】: The 34" height is engineered to create the perfect 35-36" standard counter-height surface with your tabletop. Ideal for building a comfortable, ergonomic standing desk to boost productivity, or a seamless kitchen island that perfectly matches your existing counters
CAROLINA LEG CO. Curvy Chunky Farmhouse Dining Table Legs Set - Handmade in USA - DIY Furniture - Turned Wooden Legs - Set of 4 - Dimensions: 5" x 29"
Handmade in North Carolina, USA
VEVOR Metal Table Legs, 28 x 18 inch Desk Legs, Set of 2, Heavy Duty Bench Legs, Z Shape Metal Furniture Legs,Wrought Iron Coffee Table Legs, Home DIY for Dining Table w/Rubber Floor Protectors,Matte
【PREMIUM METAL MATERIAL】- The table legs are made of heavy-duty steel material. Product size: 28 x 18 inches, square pipe thickness: 0.08"/2 mm. The legs' surface is coated with matte against corrosion, rust, and scratches.
10% discount
Taelakeni 36 Inch Metal Table Bar Legs, Heavy Duty Industrial Style Table Leg with Adjustment Feet Pads, Trapezoid
Sturdy & Popular Bulid Up: These bar table legs are made by heavy duty metal pipes. The maximum load weight of one set of legs can up to 800 lbs
18% discount
Yes4All Metal Table Legs, 28 inch Height with Adjustable Protector Levelers, Zig Zag Heavy Duty, Black, Bear Up to 800lb, Set of 2
ROBUST SUPPORT, 800 LBS CAPACITY: Made from heavy-duty square steel tubes, our metal table legs 28 inch offer exceptional strength, supporting up to 800 lbs; These metal table legs 28 inch provide the ultimate stability and durability for your furniture.
15% discount
PHWOTAN Metal Table Legs - Black Industrial Furniture, Set of 2 Dining Table Legs (Hourglass-Shaped, 28" H X 17.7" W)
【Bear Up to 800lb】 Heavy duty meral table legs are made of black powder coated pipes with strong load-bearing capacity of 800 lbs. Metal Legs size: width 17.7'' x Height 28'', tube size: 1.18 x 1.97 inchs. Bevel angle of 60.
13% discount
BOTAOYIYI Metal Table Legs, Triangle Shape Industrial/Modern Heavy Duty Dining Table Legs Set of 2 (28.3'H 23.6'W)
SIZE: L: 23.6" x H: 28.3" x W: 3.1"
20% discount
SNYXXOZ Table Legs 28”H x 20”W Heavy Duty Metal Furniture Legs K Shape for Dining Table Kitchen Table Office Desk Table Base Replacement with Adjustable Feet Pads Screws 1000 LBS Load Black Set of 2
Heavy-Duty 30×50mm Steel Frame for Strong Structural Support:Constructed from 30×50mm flat tubing, these table legs are designed to deliver dependable strength for everyday dining and workspace use. The fully welded one-piece construction improves rigidity and reduces movement compared to bolt-together frames, making them ideal as dining table legs, kitchen table legs, and durable desk legs. Perfect for homeowners, woodworkers, and DIY builders creating custom wood tables that require reliable, long-term support.
Flowyline 16" H 108 Curva Handcrafted Black Metal Table Legs and Bases for Bench | Steel Coffee Table Legs | Rust-Resistant, Adjustable Furniture Legs | DIY Mid-Century Modern Indoor/Outdoor
[Graceful Curved Design for Benches & Coffee Tables] The 108 Curva metal bench legs 16 inch height bring balance and sculptural artistry to any space. Measuring 12.9" L × 2.6" W × 16.3" H with shipping weight 19 lbs per set, these black steel furniture legs feature smooth, flowing curves inspired by minimalist design. Perfect for metal bench legs, coffee table legs, and modern bench legs, they combine timeless elegance and modern strength — ideal for living rooms, dining areas, or creative studio builds.
Waddell GTL29 4 Count Enamel Folding Table Leg, 29", Black
The product is easy to use
MBQQ Furniture Legs 35”Height 15”Wide Rustic Decory T Shape Table Legs,Heavy Duty Metal Desk Legs,Dining Table Legs,Industrial Modern, DIY Iron Bench Legs
【Industrial Rustic Style】Restore and repurpose old wood planks to make a fantastic of industrial rustic furniture.
10% discount
Signstek Metal Table Legs for Desk - 28 Inch Trapezoid Heavy Duty Iron Tube Furniture Legs, DIY Stool/Chairs, Coffee Tables, Bench, Side/End Table, Black, Set of 2
Metal Desk Legs: 28 inch trapezoid metal table legs made of cold-rolled sturdy industrial-grade steel with 0.79-inch (20 mm) tube diameter for 50% less wobble VS. flat-bar desk legs, supports tabletops securely
Metal Table Legs 28 Inch Heavy Duty Metal Desk Legs Industrial Black Table Legs, Furniture Legs
[STRONG BEARING CAPACITY] Made of hard and durable iron, the maximum load weight of leg is about 800lbs. This metal table leg is sturdy and not wobble and suitable for most of home use.
QLLY Adjustable Round Desk Leg, 24-40 inch, 60-100cm, Home Office DIY Metal Table Leg, Furniture Leg Set (4, Black)
Size: QLLY Adjustable Table Leg has a adjustable length of 60, 65, 70, 75, 80, 85, 90, 95, 100 cm. You can adjust the length to 24, 26, 28, 30, 32, 34, 36, 38, 40 Inch. Screw mechanism on the bottom can adjust about 0.6 inch/1.5cm, mounting plate is about 0.4 inch/1cm height.
13% discount
VEVOR Set of 2 Steel Table Legs, 28 Height 31 Wide Dining Table Legs,Heavy Duty 3.1" Square Box Section X Frame Table Legs,28x31x3.1 Inch Black Color Industrial Country Style Metal Dining Legs
【HIGH QUALITY】- Color: Black; Height: 28.4"; Width: 31.1"; Amount: 2; Box Section: 3.15" X 3.15"; Top plate size: 3.9". These table legs adopts cold rolled steel with sandblasted finished. The surface is sprayed with black powder, compared with other table legs using oil paint finished, it is more durable and can effectively prevent them from cracking, rust and corroding.
TENGCHANG Hairpin Legs 18 inch Metal Table Legs Set of 4, Heavy Duty Black Furniture Bench Coffee Dinning Desk Legs
【100% Solid Construction】Our hairpin Legs made of 3/8" (10mm) Solid cold-rolled steel. Load capacity up to 500LBS.
CHICAURA Heavy Duty Metal Table Legs 28x24 Inch, Modern Industrial Steel Square Frame for DIY Dining Table, Kitchen Table Base, Desk, Workstation, Supports 1000lbs, Set of 2 (Black)
【Rock-Solid Stability on Any Floor】: Eliminate table wobble for good. Our legs feature upgraded M12 adjustable leveling feet (1.57" range) to ensure perfect balance on uneven floors, protecting them from scratches while keeping your valuable tabletop stable
ALLCOS Metal Bar Table Legs, 36 Inch Heavy Duty Dining Table Leg with Adjustment Feet Furniture Legs, Black, Set of 2
【Metal Bar Table Legs】: Size: 36"H x 13.78"W(36.39" H with pads), Mounted Board Length: 13.78", Mounted Board Width: 3.54",Color: Black, Condition: 100% New, Material: Iron, Weight: 18LBS(2 pcs ), Surface Finish: baking finished. Suggest: Check the product size beforehand, the board should be at least 2 inches wider than the product.
15% discount
FUSHIAIPTC 30 Inch Metal Table Legs, Heavy Duty Desk Legs Combinatorial Dining Table Legs for Wood, Glass, Marble Tabletop, Table Base Only These Table Leg Come in a Golden Ratio Design
BE UNIQUE: The combination is completed by four independent table legs, matching the most artistic table legs, the unique design and artistic touch of the legs add a sense of uniqueness to your furniture. Can give your abandoned desktop a new look
ALLCOS 36 Inch Metal Bar Table Legs, Heavy Duty Dining Table Leg Desk Legs with Adjustment Feet, Black, Set of 2
【Metal Bar Table Legs】: Size: 36"H x 13.78"W(36.39" H with pads), Color: Black, Condition: 100% New, Material: Iron, Weight: 16.5LBS(2 pcs ), Surface Finish: baking finished. Suggest: 1. Check the product size beforehand, the board should be at least 2 inches wider than the product; 2. For the same product in the market, our steel material is thicker and heavier.
WHUANGKAKA 40 Inch Bar Table Legs for Desk, Dining Table with Adjustable Feet Pads,Home DIY Furniture Legs，Black Set of 2.
【Material & Durability】These height table legs are Made from high-strength steel with a rust-resistant finish, ensuring long-lasting durability without rust or deformation.Each leg supports up to 1000 lbs, with a total weight capacity of 800 lbs for a set of twolegs.
Taelakeni 36 Inch Metal Bar Table Legs, Heavy Duty Industrial Style Dinning Table Leg with Adjustment Feet Pads, Set of 2
Sturdy and Popular Bulid Up: The 36 inch bar table legs are made by heavy duty metal pipes. The maximum load weight of one set of legs can up to 800lbs
TableLegsOnline 28" Tall, Single Table Leg, Office Height - Brushed Steel - from
Diameter: 2-3/8" (60mm)
CAROLINA LEG CO. Square Farmhouse Dining Table Legs - Made in USA - Set of 4-3.5" x 29" - Ideal for Custom Furniture Projects
Handmade in North Carolina, USA
FUSHIAIPTC 28 Inch Dining Table Base, Heavy Duty Table Legs 1000 LBS Load Capacity, Industrial Metal Desk Legs for Round & Oval Tops, Fits Glass Marble Wood Matte Black
SCULPTURAL SPIDER BASE -TURNS YOUR TABLE INTO ART: The dramatic 6-ray star design radiates from a single center hub, creating a striking silhouette unlike any standard table leg. At 47.3" span, this spider base fits rectangular, oval, and round tabletops 24"–83" — delivering visual impact and center-point stability simultaneously.
sumatos Table Legs 28 inch, Metal Dining Table Base, Heavy Duty Desk Legs,Industrial Modern Furniture Legs Set of 2 with Laser Engraving Design (A)
Creative Cutout Pattern: Unique cutout pattern inspired by natural shapes such as branches or flowing water. The overall shape of the leg is a rectangular frame, providing a clean, modern silhouette, also ensuring stability and durability.SIZE: 17.7"W x 28"H
Shepherd Hardware 8130E 16" Adjustable Fit Table Clamp Legs, Black
Set of 4 steel legs that create a 16” tall coffee table when combined with nearly any flat & sturdy surface.
Coffee Table Legs 16 inch, Metal Table Legs Diamond Shape Black Industrial Modern Bench Chair Base Furniture Legs Desk Leg (Black)
Powder Coat: Advanced sandblasting materials and processes make the surface of the table legs powder coated and smooth, durable finish, makes it resistant to chipping, peeling, and scratching, It is dustproof and not easy to rust.
5% discount
Patavinity Metal Table Legs 28 inch Height x 24 inch Wide with Adjustable Protector Feet, Industrial & Rustic Style Heavy Duty Metal Furniture Legs for Desk/Table, (Bear Up to 800lb), Black, Set of 2
【Height Adjustability & Floor Protection】: The adjustable feet are designed to level the legs by the screw on the bottom(adjustment range:1.2 in), it helps you to get a suitable-height and stable table. The feet's material is great for preventing a wobbly table and protecting the floor from scratching.
5% discount
Heavy Duty White Metal Table Legs - 28 Inch Square Tube Dinning Table Legs (4 Only Legs)
WHITE TABLE LEGS:These white desk legs have a good looking surface finish and have not warped or discolored under use.Replacing the out-of-style office desk and attaching these legs to create a lighter,more modern desk in your home.
17% discount
VEVOR Set of 2 Steel Table Legs, 28”Height 23”Wide Dining Table Legs,Heavy Duty 3.1" Square Box Section Square Table Legs, 28x23x3.1 Inch Black Industrial Country Style Metal Dining Legs
High Quality: Height: 28.3"; Width: 23.6"; Amount: 2; Box Section: 3.15" x 3.15"; Top plate size: 3.9" . These table legs adopts cold rolled steel with sandblasted finished. The surface is sprayed with varnish painting, compared with other table legs using oil paint finished, it is more durable and can effectively prevent them from cracking, rust and corroding.
MBQQ Furniture Legs H28 Rustic Decory Table Legs,Heavy Duty Metal Desk Legs,Dining Table Legs,Set of 4 Black,DIY Iron Legs
【Industrial Rustic Style】Restore and repurpose old wood planks to make a fantastic of industrial rustic furniture.
10% discount
Metal Coffee Table Leg 16” Height Industrial Rectangle Legs, Metal Bench Legs for Table Mid-Century Modern Design, Set of 2
MADE OF HEAVY DUTY SOLID METAL-These metal coffee legs are made of high quality sturdy steel. The heavy-duty legs come with a satin black powder coated finish and will keep it in good condition for decades.
TC-HOMENY 30 inches Dining Table Legs Set of 2 Metal Legs Bench Legs Industry Coffee Table Desk
Dining Table Legs-- 30 inches height tall table legs is more suitable for making dining table or coffee table. Black spray paint coating is industrial design style, it is suitable for DIY to make your own style furniture table.
5% discount
BOTAOYIYI 30 Inch Modern Table Base Metal Dinning Table Legs with Suction Cups, Heavy Duty Desk Base for Marble,Glass,Wood Top, Furniture Legs for Home,Kitchen,DIY Bench Legs Coffee Table (Black)
Solid Materials & High Quality Crafts:Upgrade matte baking paint,stable and anti-scratch.Premium heavy thicken steel tube to enhance protection against rust and corrosion. Adopted environmentally friendly spray paint, no peculiar smell, resists scratches, the longer life span of the table base
WHUANGKAKA 36 Inch Metal Bar Table Legs for Desk, Dining Table with Adjustable Feet Pads,Home DIY Furniture Legs，Black Set of 2(W18”*H36”).
【Material & Durability】These height table legs are Made from high-strength steel with a rust-resistant finish, ensuring long-lasting durability without rust or deformation.Each leg supports up to 1000lbs, with a total weight capacity of 600 lbs for a set of twolegs.
14% discount
NXN-HOME 19 inch Round Plate Table Base Legs, Coffee Table Legs, Bench Metal Legs, Mid Century Home DIY Projects Black Furniture Legs(19”H x 14”W)
GREAT DIY PROJECT: Using these furniture legs to create a custom coffee table, end table, or night stand lets you put together a unique gift that will stand out above the rest. Your gift will be remembered, cherished, and used for years to come.
iWEDN 40 Inch Bar Height Table Legs, Heavy Duty Metal Legs for Table, Home DIY Furniture Legs, Set of 2 (40inch Height, 45cm Width, Rectangular)
Bar Height Table Legs: With a height of 40 inches, these legs perfectly match the bar height table. At the same time, they can also be applied to computer desks, workbenches, and cross washing machine countertops, and many other occasions that you need
TIEOU Metal Desk Legs 28 Inch Table Legs Heavy Duty Industrial Black Table Legs Z Shape DIY Table Leg, Furniture Legs(H28”xW18”,Set of 2)
STURDY METAL LEGS:This desk leg is made from sturdy wrought iron in a matte black finish,through careful sanding and painting, all welds are blended and each of desk legs is smooth and debris-free.
5% discount
Metal Table Legs 16 inch Height x 17.7 inch Wide with Adjustable Protector Feet, Heavy Duty Metal Furniture Legs for Coffee Table, Cocktail Table, Square Tube Leg (Bear Up to 800lb), Black, Set of 2
【Height Adjustability & Floor Protection】: The adjustable feet are designed to level the legs by the screw on the bottom(adjustment range:1.2 in), it helps you to get a suitable-height and stable table. The feet's material is great for preventing a wobbly table and protecting the floor from scratching.
SMARTSTANDARD 34 Inch Hairpin Table Legs, 3 Steel Rods (Black, 4PCS)
Heavy Duty Steel: These hairpin legs are made of 1/2 inch pipe diameter cold rolled sturdy steel. The heavy-duty table legs come with the black powder-coated finish. Four legs will support up to 800lbs.
MSOBAIW 22 Inch Hairpin Legs, Heavy Duty Metal Table Legs for Coffee Table, Chair, Bench, Desk, Nightstand, 3/8" Dia Satin Black Two-Rod Mid Century Modern Style
Minimalist Design: A sturdy twist on the classic mid-century modern style hairpin legs have a classic V shape, simple and natural, rustic industrial style
5% discount
ITeeLas H Bench Legs 16 Inch Metal Coffee End Table Legs, Black Set of 2, 16" H x 11" W
DIY Metal Table Legs: Our 16" table legs with unique design is made of high-quality and solid steel. The surface has been specially treated and covered with antirust powder coating. It is smooth and delicate in touch, rustproof and not easy to deform. As a replacement legs, it can be used as coffee table legs, console table legs, metal bench legs, etc. You can give play to your hands-on ability, reuse the old boards, and make the industrial and rural furniture you want
ALLCOS Metal Table Legs 30 Inch Heavy Duty Dining Desk Legs Black Metal Coffee Table Legs with Adjustable Feet Pads, Black, Set of 2
【Metal Table Legs】: Size: 30"H x 15.75"W(30.39" H with pads), Color: Black, Condition: 100% New, Material: Iron, Weight: 15LBS(2 pcs ), Surface Finish: baking finished. Suggest: 1. Check the product size beforehand, the board should be at least 2 inches wider than the product; 2. For the same product in the market, our steel material is thicker and heavier.
decorluxes Unfinished Farmhouse Table Legs Dining Table 2.8" X 29" Set of 4 DIY Coffee Table Rustic Turned Style Leg | Easy to Paint Any Color You Want (29 inch)
Product size : 2.8'' x 2.8 " x 29 ''. Set of 4 legs. Rubber wood.
5% discount
TENGCHANG 2 PCS 28'' Industry Trapezoid Dinning Table Legs Metal Steel Desk Legs DIY Furniture
Load Capacity: 2PCS Metal table legs 28 inch are made of heavy duty steel material, which the maximum load weight can bear up to 600-800lb.
PHWOTAN Upgraded 2 Tier Coffee Table Legs, Square Metal 16 Inch Height 18 inch Width, Heavy Duty Bench & DIY Side Table Legs Set of 2
【2 Tier Table Legs】 With 2 extended iron pieces to put an additional board, these 2 tier coffee table legs offer you more space to organize small gadgets, make your room more clean and tidy.
15% discount
TITECK Metal Table Legs 28 Inch - Kitchen Dining Desk Leg Trapezoid Heavy Duty Steel Furniture Replacement Feet for DIY Bench, Stool, Chair, Coffee Tables, End/Side Table (Set of 2, Black)
【Metal Table Legs】TITECK Trapezoid table legs 28 inch height made of cold-rolled sturdy industrial-grade steel tube with welded mounting plate enhances durability and structural integrity, delivers 50% less wobble VS. flat-bar desk legs
5% discount
QLLY 30 inch Adjustable Metal Desk Legs, Heavy Duty Furniture Table Legs with 1" Leveling Adjustment for DIY Office Desk, Workbench, Dining Table, Set of 4 (White)
Need standard‐height legs for your DIY desk? These 30‐inch legs fit perfect for standard office desks, workbenches and dining tables, ideal for custom home furniture builds.
Lendpea Metal Table Legs Heavy Duty Square Tube Desk Frame Modern Dining Table/Coffee Table Legs,Set of 2(H)
Great Size With Strong Capacity- Width 17.7'' x Height 28'', ideal height to sit on .With Strong steel construction for 800lbs capacity yet this table lega doesn't take up too much space from your room
ALLCOS Bench Legs 16 Inch X-Shape Metal Bench Legs Sturdy Metal Coffee Table Legs, Set of 2, Black
【Metal Bench Legs】: Size: 16"H x 11"W(16.5"H with pads), Each mounting plate size: 3.15"x3.15", Color: Black, Material: sturdy steel tube, Weight: 7.5LBS. Suggest: Check the product size beforehand, the board should be at least 2 inches wider than the product.
CAROLINA LEG CO. Chunky Farmhouse Table Legs - Handmade in USA - Unfinished - DIY Furniture - Turned - Set of 4 Wood Table Legs- Dimensions: 3.5" x 29"
Handmade in North Carolina, USA
Btowin 35 1/2-inch H 3 1/2-inch W 3 1/2-inch D Wooden Kitchen Island Legs, 2Pcs Wood Carved Raised Panel Cabinet Columns,Unfinished Massive Replacement Feet for Large Dining Table Kitchen Counter
SIMPLE RAISED PANEL COLUMNS - The Square Mission Kitchen Island Leg boasts a simple square profile with the impressive recessed sections that were popular in mission design. The straight, crisp lines make it ideal for anything from rustic to modern kitchen designs.
5% discount
TURSTIN 8 Pieces 16 Inches Table Legs Wood Furniture Legs Tapered Round Replacement Desk Chair Legs Mid Century Furniture Legs for Coffee Table Dresser Night Stand (Wood)
Easy to install: each wooden leg comes with 5/16 inch hanger bolt, 8 sets of bevel mounting plates, 32 pieces of screws, 8 pieces of table legs, 8 pieces of felt pads, and 1 piece of screwdriver, and all parts are simply connected, installed and screwed to work, making it very easy to replace old furniture feet, convenient and practical
15% discount
Home Soft Things Hairpin Metal Table Legs 20 Inch Legs for Furniture Coffee Bench Dining End Industrial Table Desk Set of 4 with Black Screws Adjustable Cushion Floor Protectors, 20"
Design for DIY: Living Hairpin Table Legs are designed specifically for DIYers, makers, and professionals; These hairpin metal legs are heavy duty proofed and will add both stability and mid-century modern style to any and all furniture projects
sumatos Metal Table Base，Modern Coffee Table Legs 28 Inch, Dining Furniture Legs for Glass, Marble, and Wood Table Tops, Heavy Duty Desk Legs for Home,Kitchen,Office (Silver)
Metal Table Base,Modern Coffee Table Legs 28 Inch, Dining Table Legs for Glass, Marble, and Wood Table Tops, Heavy Duty Desk Legs Furniture Legs for Home,Kitchen,Office(Black)
Fronimo Table Legs 32 Inch DIY Industrial Style Desk Bench Legs Pedestal Legs for Table with 13 Screws 4 Non-Slip Foot Pads for Coffee Table Side Tables
LONG SERVICE LIFE: High-quality steel plus new high-temperature baking coating technology, not easy to deform and damage. The manufacture of thick steel tubes greatly improves stability, and the steel tubes are designed to be fully enclosed, giving you more peace of mind when using them
5% discount
QLLY 24 inch Adjustable Metal Furniture Legs, Square Office Table Desk Leg, Table Leg, Set of 4 (Black)
Size - Height: 24 inches/61cm (with mounting plate), screw mechanism on the bottom can adjust about 0.7 inch/1.8cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 2.2LB/1KG (One Leg).
Lendpea Metal Table Legs Heavy Duty Square Tube Desk Frame Industrial Dining/Coffee/Computer Table Legs, Set of 2(Square)
Great Size With Strong Capacity- Width 17.7'' x Height 28'', ideal height to sit on .With Strong steel construction for 800lbs capacity yet this table lega doesn't take up too much space from your room
29x3.5x3.5 inch Wooden Chunky Farmhouse Table Legs, Set of 4 Solid Wood Massive Unfinished Turned Replacement Countertop Legs Kitchen Island Cabinet Columns for Bench Coffee Table Dining Table
NATURAL UNFINISHED WOODEN FURNITURE LEGS - Material: Rubber Wood. The Furniture leg is unfinished and ready for staining, painting and coloring with various mediums to fit for your Furniture color.
Licperron 2 Pack 30 Inch Industrial Metal Table Legs, Black Pipe Legs for Coffee Desk Furniture
Industrial Modern Style: Industrial coffee table legs are a great choice to decorate your dining style. Pipe table legs can not only improve the stability of the table, and their fashion appearance adds luster to your breakfast corner, kitchen or dining room.
ALXEH 14 Inch U Shaped Coffee Table Leg Black Metal Furniture Legs for Cabinet Sofa Bench and End Table, Set of 4
Thickened Steel Construction: Made of solid steel with 1/5” thick, metal table legs is sturdy and heavy duty to support furniture up to 2000lbs.
QLLY 28 inch Adjustable Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (Black)
Size - Height:28 inches/71.1cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter:2 inches/5cm. Weight: 1.87LB/0.85KG (One Leg).
8% discount
ADYLEGS 16 Inch Metal Coffee Table Legs, Heavy Duty Bench Legs Black Metal End Table Legs for DIY Furniture Legs (2er-Set V-Shaped)
Live Edge Coffee Table: Double V-shaped design makes the table legs perfect, you can create more home DIY furniture projects. Perfect for making coffee tables, side tables, tea tables, low tables, end table legss, nightstand legs, etc
Metal Table Legs 28”Height 17.7”Wide Heavy Duty Desk Legs DIY Furniture Legs for Dining Table ,Coffee Table ,Office Desk Set of 2
STRONG BEARING CAPACITY-Made of heavy duty solid Steel, every legs is composed of 1.97*1.18"thick square tube which could bearing load up to 800lbs. Square Tube Legs will build a table more stable and study compare to hairpin legs
Spider Metal Table Base, Heavy Duty 4-Leg Coffee Table Legs, 29 Inch Dining Table Base, Industrial Steel Desk Base Furniture Legs for Wood Glass Marble Tops, Bench Legs with Adjustable Feet, Black
DUAL MOUNTING OPTIONS FOR MULTIPLE TABLETOPS Designed for versatile use, this metal table base includes mounting plates with screws for secure installation on wooden tabletops, plus rubber suction cups for glass or smooth surfaces like marble. Easily switch between materials without extra tools, making it ideal for DIY coffee tables, dining tables, desks, and custom furniture projects.
10% discount
SMARTSTANDARD 40 Inch Hairpin Table Legs, 3 Steel Rods 1/2 Inch Pipe Diameter, 800lbs Load Capacity, Mid-Century Style for Coffee Table, Side Table, Night Stand (Black, 4PCS)
Heavy Duty Steel: These hairpin legs are made of 1/2 inch pipe diameter cold rolled sturdy steel. The heavy-duty table legs come with the black powder-coated finish. Four legs will support up to 800lbs.
DuraSteel Galvanized Legs for Work Table - 33.5 inch Replacement Galvanized Legs - Fits Commercial Food Prep Stainless Steel Utility Table or Maple Wood Worktable, Silver
Strong Compatibility: The replacement leg is 33.5" in height and 1.6" in dia. which are compatible with DuraSteel Standard, Backsplash, Die Cast Corner and Wooden Work Tables
LCSDLHLSY Table Legs 32 inch, Adjustable Square Furniture Legs, for DIY Computer Desks, Coffee Table, Dining Table,Black Set of 4.
【Sturdy & Heavy Duty】: These furniture legs are made of strong metal, they are heavy duty,with a weight capacity of up to 800lbs.high temperature curing rust-resistant black powder coating not only keep the iron away from moisture while retaining an industrial feel.The adjustable furniture legs are hand welded directly to the solid square base, more stable than screw connections.
Metal Industrial Dining Modern Table Legs Desk Legs Base Cast Iron Welding Wrought Iron Coffee Table Bench Legs Night Stand Office Table 28 inch Triangle Shape Black DIY 28" H x19.7W (2 pcs)
RESISTANT TO CORROSION: Baked powder coating surface treatment helps create a uniform, durable finish, makes it resistant to chipping, peeling, and scratching, enabling our product to withstand rainy weather and to be suitable for outdoor use
LBSLMJB 28 Inch High Triangular Shaped Metal Table Legs, Modern Cast Iron Welded Desk Legs, Metal Home DIY Project for Nightstand, Coffee Table, Desk, etc. with Adjustable Floor Protector, Black 2PCS
【Exceptional Load-Bearing Capacity】: These heavy-duty desk legs support up to 900 lbs, ensuring absolute stability and safety for your workstation, crafting table, or industrial bench.
MKOEIY 28 Inch Metal Dining Table Legs, Heavy Duty Desk Legs Set of 2, 1000 LBS Load Capacity, Industrial Iron Leg for DIY Desk, Kitchen Table, Conference Table, with Adjustable Feet, Matte Black
1000 LBS CAPACITY — ENGINEERED FOR FULL-SIZE DINING TABLES: Built from 100% thickened iron with a full-weld X-frame structure, these 27.6-inch dining table legs support up to 1000 LBS per set — easily handling a heavy solid wood or stone slab top loaded with dishes, serving platters, and the weight of daily family meals. The wide 23.7" footprint provides the lateral stability that larger tabletops demand.
OLDRAINBOW Metal Round End Table Legs,16 Inch Black Coffee Table Base Only,Iron Dining Table Base Furniture Legs
【Size】Height 16.1 x Bottom Diameter 17.7 INCH.
Rioychan 20 Inch Coffee Table Legs Black, Heavy Duty Metal Furniture Legs for DIY End/Side Tables, Modern Desks, Bench, Sofa, Dining Desk Legs, Z Style
Sturdy and Focus on Quality: The unique double triangle shape design and thickened steel material can ensure the stability and durability of the 20 inch metal table legs. Allowing a set of 20" black metal bench legs to carry a maximum weight of up to 800 pounds
5% discount
KOMOHOM Adjustable Furniture Leg Set 32~51 Inch, Adjustable Metal Table Leg， Home Office DIY Metal Desk Legs, for Computer Desk Dining Table Office Desk (4, Black)
【Unique height adjustable design】 You can adjust the height of the metal desk support leg from 32 inches to 51 inches maximum according to your own installation need. You can adjust the length to 32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51 Inch. Bottom adjustable feet can be extended 1 inch to Leveling the desktop. Adjustable legs can be easily adjusted to any specific position between 32 inches and 51 inches.
Osring 12 Inch Coffee Table Legs U-Shaped, 2pcs Solid Steel Table Legs for Furniture, TV Stand and Bench, Black
Metal Furniture Legs: 12” high table legs is designed for DIY enthusiasts to remodel their favorite furniture, like outside bench, coffee table and side table.
5% discount
QLLY 16 inch Adjustable Metal Furniture Legs, Square Office Table Desk Leg, Table Leg, Set of 4 (Black)
Size - Height: 16 inches/40.6cm (with mounting plate), screw mechanism on the bottom can adjust about 0.7 inch/1.8cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 1.65LB/0.75KG (One Leg).
TOCRETOARE Metal Table Legs Heavy Duty, 28”H x 18”W, Metal Furniture Legs for Dining Desk Bench and Coffee Table, Industrial Black DIY Iron Bench Legs, Set of 2
Enhanced Stability : This mental furniture legs set added independent 2 mm thick, 1.2 inch wide metal plates on both sides to make our metal table legs fit work board more perfectly, which improving stability by 80%. Plus, our upgraded screw-in rubber foot pads allow for height adjustment, preventing table shaking and safeguarding your floors from damage
5% discount
ITeeLas Metal Table Legs 16 Inch Heavy Duty Bench Legs DIY Metal Coffee Table Legs Black Set of 2 16" H×11" W
DIY Metal Table Legs: Our 16" table legs with unique design is made of high-quality and solid steel. The surface has been specially treated and covered with antirust powder coating. It is smooth and delicate in touch, rustproof and not easy to deform. As a replacement legs, it can be used as coffee table legs, console table legs, metal bench legs, etc. You can give play to your hands-on ability, reuse the old boards, and make the industrial and rural furniture you want
Tandefio 2 Pcs Folding Table Legs 28 Inch Banquet Foldable Table Legs Collapsible Heavy Duty Steel Furniture for Home, Kitchen, DIY or Repairs Desks (Black)
Package Included: you will receive 2 folding table legs to easily create a quality table that provides support for all your furniture needs; Easily meet your needs
11% discount
Home Soft Things Hairpin Metal Table Legs 30 Inch Legs for Furniture Coffee Bench Dining End Industrial Table Desk Set of 4 with Screws Adjustable Cushion Black Floor Protectors, 30"
Design for DIY: Living Hairpin Table Legs are designed specifically for DIYers, makers, and professionals; These hairpin metal legs are heavy duty proofed and will add both stability and mid-century modern style to any and all furniture projects
HAOOAH Adjustable Table Legs, 20-30 inch(51-76cm),Ø50/45mm with Screws,Furniture Legs for Office,Home, Kitchen and Classroom Activity Table(4, Black)
【Size】This Adjustable Table Leg has a adjustable lentgh of 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, 75 cm. Screw mechanism on the bottom can adjust about 1.5cm/0.6 inch, mounting plate is about 1cm/0.4 inch height.
5% discount
JIANZHUO Round Table Legs 16 Inch Coffee Table Legs,Metal Table Base Black Iron Legs for Table,Metal Furniture Legs Dining
【Includes 3 Adjustment Pads】Three adjustment foot pads are included for use as an additional stabilizer for the shaking table.Also protect the floor from damage.
MKOEIY Heavy Duty 28 Inch Metal Table Legs Set of 2, 1000 LBS Load Capacity, Industrial X-Frame Double Triangle Iron Legs for Dining Table, Office Desk, Workbench, DIY Furniture, Black
DISTINCTIVE X-FRAME DOUBLE TRIANGLE DESIGN: The striking inverted double-triangle X-frame is not just eye-catching — it distributes weight evenly across the full base, delivering exceptional stability for dining tables, desks, workbenches, and custom furniture. Made from 100% thick iron with precision full-weld joints, these legs support up to 1000 LBS and stand out from ordinary straight or hairpin legs.
Yes4All 30-Inch Metal Table Legs – Industrial Pipe Design, Heavy-Duty Steel Support for Desks & Dining Tables, Set of 2
INDUSTRIAL METAL TABLE LEGS 30 INCH: Elevate your furniture with our metal table legs, combining style and function; These sleek black metal table legs 30 inch are designed to bring a touch of modernity to your space, ensuring your furniture stands out.
tonchean 28 inch Furniture Legs 4 Pack Turned Farmhouse Table Legs Set DIY Wood Legs Round Farmhous Legs Replacement Coffee Table Bench Dining Legs Varnish Coated
【High Quality Material】These Wooden Table Legs are made of Made of solid rubber wood and coated with varnish, which is very durable and sturdy. And the good process makes it stable
Heavy Duty Metal Desk Legs for Dining Table Coffee Table and Bench Industrial Black Metal Table Legs for DIY Furniture Perfect for Home Office and Modern Decor (28 * 24)
Enhanced Stability: Enhanced Stability: This metal table leg isfeatures shapeda liketrapezoidal a trapezoidshape, withstanding a28 heightinches oftall 28with inches, a top width of 24 inches, and a bottom width of 28.5 inches, makingrendering it moreexceptionally sturdy. And our metal desk legs feature independent 2 mm thick, 1.97 inch wide metal plates on both sides, improving stability by 80%. This ensures your furniture, including dining tables and coffee tables, maintains a sturdy foundation without wobbling.
POROHOM 4PCS Adjustable Square Table Leg (24-40inch)，Metal Desk Legs, Home Office DIY Furniture Leg Set for Tables, DIY desks, Counter Tops, Kitchen Tables,Office Desk (Black)
【Adjustable Height Square Table Leg】 You can adjust the height of the Square metal Table Leg from 24 inches to 40 inches maximum .This Adjustable Table Leg has a adjustable lentgh of 60, 65, 70, 75, 80, 85, 90, 95, 100cm,and Screw mechanism on the bottom can adjust about 0.78 inch/2cm.
Benbuoo Adjustable Height Table Legs Folding Tall Metal Desk Legs Heavy Duty Foldable Furniture Legs for Tabletops, Computer Table, Office Desk, DIY Desk, RV, Counter, Outdoor Set of 4
Distinct Feature: The uniqueness of this table leg compared to other brands lies in its adjustability to any height, alongside dual functions - being foldable and extendable. Constructed using heavy-duty metal, each table leg, when height-fixed using bolts, can bear a weight of up to 200 pounds.
uxcell 4 Pcs Metal Folding Table Legs, Height 21.65 Inch / 550 mm Foldable Coffee Table Leg for Cupboard Cabinet Furniture Feet Home Decor
Dimensions: The package comes with 4 Pcs Folding Table Leg Hinges, Size: 25x25x550mm / 0.98x0.98x21.65
ALLCOS Metal Bench Legs 16 Inch Coffee Table Legs Heavy Duty Furniture Desk Chair Legs, Black, Set of 2
【Metal Bench Legs】: Size: 16"H x 10.8"W(16.6"H with feet), Mounting plate size: 8.7"H x 2.75"W, Color: Black, Material: Iron, Weight: 8.8lbs(2 pcs ), Surface Finish: baking finished. !!!Suggest: Check the product size beforehand, the board should be at least 2 inches wider than the product.
sumatos Metal HairpinTable Legs Set of 4–Industrial Dining Furniture Legs, Heavy-Duty V-Shaped Brackets for DIY Coffee Table, Bar Table,Desk,Workbench (Black, 28")
Laser-Cut Steel Elegance: Inspired by urban lofts and modern minimalism, the cutout pattern mimics organic forms, bringing an architectural flair to your space. They’re bold without being bulky—ideal for elevating both aesthetics and height.
SNYXXOZ Table Legs 28”H x 16”W Heavy Duty Metal Furniture Legs X Shape for Dining Table Kitchen Table Office Desk Table Base Replacement with Adjustable Feet Pads Screws 1000 LBS Load Black Set of 2
Heavy-Duty 50×50mm Steel Frame for Strong Structural Support:Constructed from 50×50mm square tubing, these table legs are designed to deliver dependable strength for everyday dining and workspace use. The fully welded one-piece construction improves rigidity and reduces movement compared to bolt-together frames, making them ideal as dining table legs, kitchen table legs, and durable desk legs. Perfect for homeowners, woodworkers, and DIY builders creating custom wood tables that require reliable, long-term support.
CHICAURA Heavy-Duty Metal Table Legs, 16x16 inches, Modern Industrial Style Steel Square Frame, Suitable for Coffee Tables, Side Tables, etc., Load-Bearing Capacity of 800 pounds, 2-piece Set (Black)
【Rock-Solid Stability on Any Surface】: Equipped with upgraded M12 adjustable leveling feet offering 1.57-inch height adjustment, effortlessly accommodating uneven surfaces. Say goodbye to wobbly desks while protecting both floor and tabletop—safely place coffee cups and books without worry
WUHUANGKAKA 36 Inch Table Legs,Adjustable Metal Desk Legs,Suitable for DIY Furniture Legs, Computer Desk, Dining Table, Workbenches,Coffee Table, Set of 4 (Black).
【High Quality】Made of heavy duty cold rolled steel + Adjustable furniture legs + Solid square base+The anti-rust black powder coating+Floor protectors.The adjustable furniture legs are hand welded directly to the solid square base, which greatly enhances its stability. One single Leg holds up to 220 lbs.
7% discount
29"BLK FOLDING TABLE LEG (Ebco Tools APF-B)
Folding Table Legs
Rvdeaa Set of 4 Adjustable Table Legs, 24”–40” Heavy Duty Steel Square Desk Legs for DIY Computer, Dining & Work Tables, 220 lb Load Capacity, Easy Install, Black
Wide Height Adjustment: Fully telescoping design lets you adjust table leg height from 24" to 40" with precision control; Perfect for bar height, counter height, or standard dining tables; The built-in micro-leveling system keeps your table stable even on uneven floors—ideal for adjustable workbenches, standing desks, or square table legs that need extra structural support
Itvexeme 30 Inch Industrial Pipe Table Leg Set, Iron Base Legs for Coffee Tables, Desks, NightstandVintage, Dark Grey Black Rough Pipes, 2pcs
Heavy-Duty Construction: These 30-inch industrial pipe table legs are crafted from high-quality iron, offering exceptional durability and strength.
8% discount
QLLY 28 inch Slant Wooden Table Legs, Solid Wood Angled Desk Legs, Furniture Legs, Set of 4, Easy to Install - Perfect for DIY Dining Tables, Coffee Tables, and Benches (Dark Walnut, 28")
Size - Height: 28.3 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 0.78 inch/2cm, mounting plate is about 0.4 inch/1cm height. Diameter: 4 inches/10cm.
SMARTSTANDARD 30 Inch Hairpin Table Legs, 3 Steel Rods 1/2 Inch Pipe Diameter, 800lbs Load Capacity, Mid-Century Style for Coffee Table, Side Table, Night Stand (Black, 4PCS)
Heavy Duty Steel: These hairpin legs are made of 1/2 inch pipe diameter cold rolled sturdy steel. The heavy-duty table legs come with the black powder-coated finish. Four legs will support up to 800lbs.
WUHUANGKAKA 32" Square Office Table Furniture Leg,32 Inch Adjustable Metal Furniture Legs,DIY Workbench,Casual Dining Table Coffee Table Legs ect, with Floor Protectors(Set of 4).
【Sturdy & Heavy Duty】The furniture legs are made of strong metal,the adjustable furniture legs are hand welded directly to the solid square base, more stable than screw connections.rust-resistant black powder coating not only keep the iron away from moisture while retaining an industrial feel.surface electrostatic powder spraying, high temperature curing,compared with other table legs using oil paint finished, It is more durable and can effectively prevent them from cracking, Rust and Corroding. One single Leg holds up to 220 lbs.
ALXEH 10 Inch Trapezoid Table Legs Black, DIY Furniture Metal Legs for Coffee Table, Bench Stool Cabinet Furniture Feet - Set of 2
Trapezoid Furniture Legs: Perfect for decorating your delicate house, and widely used for DIY your coffee table, bench, chair and night stand.
11% discount
SunVFaFa Metal Coffee Table Legs 16 inch, Short Bench Legs for Furniture Set of 4, Dresser Cabinet Feet, Mid Century Modern Replacement Furniture feet for Chair Stool Side Table, Satin Black
STABILITY: Adjustable oblique dresser legs come with unique rotatable leveling feet that fine-tune support points and adapt to uneven floors. No wobbling, less noise, and better floor protection
5% discount
DorBuphan Folding Metal Table Legs 4 PCS, 28.7" Height Industrial Modern DIY Desk Legs, Heavy Duty Steel DIY Furniture Legs for Home, Kitchen, DIY Tables and Desks
Sturdy Table Legs Details: Height 28.7inch; diameter of the desk legs: 2 inch; come with 4 pcs metal table legs, four pcs floor protectors and twenty pcs screws; quick installation and easy operation
MUZIK 30 Inch Industrial Table Legs, 2 Pack Grey Steel Metal Pipes Vintage Furniture Legs, for Coffee and End Table Legs, 30 in H x 14 in W
PERSONALIZE YOUR INDUSTRIAL DECOR - Build your own contemporary end tables and desks with this pipe leg kit. Pair it with maple, walnut, pine, mahogany or any kind of wood slab top.
Weysat 4 Pcs Turned Table Legs Unfinished Cottage Farmhouse Rubber Wood Bench Legs Solid Wood Mid-Century Wooden Furniture Coffee Table Replacement, 16" H x 2" W
Farmhouse Style Table Legs: this package includes 4 mid-century traditional farmhouse style wooden table legs; Crafted from natural rubberwood, these legs are sturdy, durable, and provide stable support; They feature beautifully precise wood grain and a smooth surface, creating a classic rustic farmhouse aesthetic for your space
Itvexeme 28 Inch Industrial Pipe Table Leg Set, Iron Base Legs for Coffee Tables, Desks, NightstandVintage, Dark Grey Black Rough Pipes, 2pcs
Heavy-Duty Construction: These 28-inch industrial pipe table legs are crafted from high-quality iron, offering exceptional durability and strength.
CHICAURA 16 Inch Metal Bench Legs (Set of 2), Heavy Duty Steel Coffee Table Legs, Modern Industrial Trapezoid Frame for Easy DIY Projects, Supports 500lbs (16" H x 12" W, Black)
【Rock-Solid Stability on Any Floor】: Eliminate table wobble for good. Our legs feature upgraded M8 adjustable leveling feet to ensure perfect balance on uneven floors, protecting them from scratches while keeping your valuable tabletop or bench seat perfectly stable and wobble-free
Osring 34 Inch Hairpin Table Legs with 1/2" Dia 3-Rods, Heavy Duty Metal Hairpin Furniture Leg for Coffee Table and Patio Bench, Gold Furniture Feet with Floor Protectors for Home DIY Project, 4 Pack
PERFECT FOR DIYERS: Osring hairpin legs 34 inch are designed specifically for DIY enthusiast and professionals to remodeling coffee tables, TV stands, credenzas, dressers, end tables.
POROHOM 4 Pack Adjustable Table Legs (19-30 Inch),Heavy Duty Steel Furniture Legs, 0.8" Increment Height Adjustment, DIY Desk Legs for Dining Table, Workbench, Office Desk & Kitchen Island (Black)
19"-30" Precision Height Adjustment in 0.8" Increments. Our adjustable table legs offer a wide height range from 19" (48cm) to 30" (76cm), with 0.8" (2cm) incremental adjustments via pre-drilled holes. This height adjustable table legs allows you to customize the height for ergonomic.
MSOBAIW Hairpin Legs 28 Inch Set of 4, DIY Metal Table Furniture Legs Ideal for Dining Table, Desk, 3/8" Diameter Mid Century Modern Style (71 cm, Black)
Minimalist Design: A sturdy twist on the classic mid-century modern style hairpin legs have a classic V shape, simple and natural, rustic industrial style
HouseAid 16 Inch Industrial Pipe Legs, Rustic Iron Legs for Custom Tables and Furniture, DIY Heavy Duty Metal Legs for Farmhouse Home Décor, Matte Black
【Industrial Design】With industrial design, the iron pipe table legs look awesome and are suitable for rustic and vintage home décor. It's really a great addition to farmhouse!!
QLLY 28 inch Slant Wooden Table Legs, Solid Wood Angled Desk Legs, Furniture Legs, Set of 4, Easy to Install - Perfect for DIY Dining Tables, Coffee Tables, and Benches (Walnut, 28")
Size - Height: 28.3 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 0.78 inch/2cm, mounting plate is about 0.4 inch/1cm height. Diameter: 4 inches/10cm.
38 Inch Industrial Pipe Table Leg Set H-Shape Black Iron Base Legs Coffee & End Tables, Desks, Nightstand - Vintage, Mid-Century Modern Aesthetic 2 Pack
INDUSTRIAL METAL LEGS FOR YOUR HOME STYLE: Our table legs are made of high-quality pipe and be galvanized. These sleek black metal table legs are designed to add a touch of modernity to your space, ensuring your furniture stands out.These sleek black metal table legs are designed to add a touch of modernity to your space, ensuring your furniture stands out.
Hocamel Adjustable Table Legs 18-30 inch (45-75cm), Metal Desk Legs Ø45/50 mm with Screws, Telescopic Legs for Home and Office,Kitchen, Classroom Activity Table,Tabletops, DIY Desk, RV(4-Pack)-Black
【Adjustable Height Table Legs】 Hocamel's adjustable table legs are adjustable from 45-75 cm (17.7-29.5 inches). Available lengths include 45, 47, 49, 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, and 75 cm.
decorluxes Farmhouse Table Legs, Legs for Furniture Set of 4 Unfinished Wood Furniture | Dining Table Legs | Easy to Paint Any Color You Want (Furniture Legs 16 Inch)
WOODEN FURNITURE LEGS: Made from 100% Rubber wood material - one of the best woods to make furniture, it sustains form and gives a great look with beautifully precise wood veins & and a smooth surface for better painting.
Threehoney 4 Pcs Farmhouse Table Legs, 16''x2.6'' Pine Dining Table Legs for Furniture Unfinished Wooden Furniture Dining Cottage Bench Coffee for DIY(Round)
4-Piece Farmhouse Table Legs: made of pine wood, beautiful appearance, clear and precise wood grain, smooth surface, easy to paint, you can paint it in your favorite color to suit your project, providing DIY coloring opportunities
Itvexeme 16 Inch Industrial Pipe Table Leg Set, Iron Base Legs for Coffee Tables, Desks, NightstandVintage, Dark Grey Black Rough Pipes, 2pcs
Sturdy Construction: This set includes 2 industrial-style pipe legs crafted from high-quality iron for exceptional durability and stability.
Yes4All 38 Inches Metal Table Legs, Industrial Pipe Counter Bar Height Table Legs, Desk Legs for DIY Dining Table, Workbench, Replacement H Shape Parts with Gloss Black Powder Coating - Set of 2
INDUSTRIAL METAL TABLE LEGS FOR YOUR HOME STYLE: Elevate your furniture with our metal desk legs, combining style and function; These sleek black metal table legs 38 inches are designed to add a touch of modernity to your space, ensuring your furniture stands out
SMARTSTANDARD 18 Inch Hairpin Table Legs, 3 Steel Rods 1/2 Inch Pipe Diameter, 800lbs Load Capacity, Mid-Century Style for Coffee Table, Side Table, Night Stand (Black, 4PCS)
Heavy Duty Steel: These hairpin legs are made of 1/2 inch pipe diameter cold rolled sturdy steel. The heavy-duty table legs come with the black powder-coated finish. Four legs will support up to 800lbs.
KOMOHOM Adjustable Metal Desk Leg 21~36 Inch, Adjustable Metal Table Legs, Home Office DIY Furniture Leg Set, for Computer Desk， Dining Table， Office Desk (2, Black)
Adjustable-length table legs design: You can adjust the height of the metal desk support leg from 21 inches to 36 inches maximum according to your own installation need. You can adjust the length to 21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36 Inch. Bottom adjustable feet can be extended 1 inch to Leveling the desktop. Adjustable legs can be easily adjusted to any specific position between 21 inches and 36 inches.
DoubleFill 4 Pack 34 Inch Metal Table Legs Round Tapered Furniture Legs Heavy Duty Replacement Chair Feet with Mounting Screws and Plastic Mats for Sofa Coffee Table Desk Bar DIY Projects, Black
Quantity and Quality: crafted from thickened metal, these 4 pcs of 34 inches / 86 cm tall furniture legs are designed to withstand daily use without rusting or fading; They provide robust support to chairs, desks, tables, cabinets, sofas, and more, boasting a straight tapered shape for an elegant touch, and enough quantity meets your daily replacement needs. Note: Please confirm size before purchasing
Benbuoo Folding Adjustable Table Legs 27 to 41 inch, Metal Telescopic Storage Desk Legs for Outdoor Camper, RV, Coffee Dinner Table, Tabletops, Kitchen, DIY Bar Desk, Tablesaw, 2pcs Black
The difference between this product and common table legs is that he has two functions at the same time, both can be retracted to quickly adjust the length, and also can be folded and stored away, suitable for most scenarios.
Y-CFHFC 16 Inch Metal Bench Coffee Table Legs, Heavy Duty End Table Legs, Black Side Table Legs for DIY Desk Chair Furniture Legs (H16 x W11.8, Set of 2)
Sturdy Structure and Heavy Duty Design: These 16 inch metal table legs are made of heavy-duty metal tubes and thickened steel material can ensure the stability and durability of the metal bench legs.Through careful sanding and painting, all welds are blended and each of iron bench legs is smooth and debris-free
Feeloco Multifunctional Metal Furniture Legs with Caster Wheels,4 Pack Heavy Duty Table Risers,Adjustable Table Leg Extenders,Desk Legs with Detachable Locking Casters(10.6 inch)
Optimum Mobility and Stability: The Feeloco Folding Table Legs with Wheels are designed to provide effortless movement and ensure stability for your furniture. With the heavy-duty casters, you can easily maneuver your furniture across different surfaces, whether it's carpeted or hard floors.
DEROFIT Desk Legs, 28 inch Adjustable Metal Table Legs, Heavy Duty Office Table Furniture Leg Set of 4 for DIY Projects, Workshop Benches, Gaming Desk, 1200 lbs Bear Weight, Black
Heavy-Duty All-Metal Build: Table legs ONLY!Table is NOT included. Each desk leg is made from thick steel with a durable rustproof finish, offering long-lasting strength and stability for desks, tables, workbenches, living room consoles and more
Benbuoo Adjustable Folding Table Legs 25-34", Heavy Duty Metal, Set of 2 | Height Adjustable, Foldable, Sturdy | for DIY Desks, Computer Tables, Office Workstations, RV Camping, Outdoor Furniture
Distinct Feature: The uniqueness of this table leg compared to other brands lies in its adjustability to any height, alongside dual functions - being foldable and extendable. Constructed using heavy-duty metal, each table leg, when height-fixed using bolts, can bear a weight of up to 200 pounds.
VEVOR Adjustable Table Legs, 24-40 in Square Steel Furniture Legs, 1200 lbs Max Load Heavy Duty, Quick Installation, Ideal for Home Office Desk DIY, Coffee Dinner Bar Tables, Workbenches, 4 PCS, Black
Exceptional Load Capacity: Designed to support up to 1200 lbs / 544 kg, these table legs provide reliable strength for heavy tabletops or large storage builds, helping keep your table stable and maintain its shape over time
ALAMHI Wood Furniture Legs 16 inch - Coffee Table Legs - Mid Century Feet Replacement for Legs for Table - Coffee Table, Desk, Chair, Dresser, Ottoman, Cabinet, Bench Legs, Etc. Brown
ALAMHI
MUZIK 4 Pack Industrial Pipe Table Leg Set, Iron Base Legs for Coffee & End Tables, Desks, Nightstand - Custom Vintage Tables and Furniture Decorations (26 × 1 inch)
PERSONALIZE YOUR INDUSTRIAL DECOR - Build your own vintage end tables and shelves with this pipe leg kit. Pair it with maple, walnut, pine, mahogany or any kind of wood slab top.
TEMI 16" Wood Table Legs – Premium Set of 4 Wooden Furniture Legs for Desk, Coffee Table, Bench, Chair, Dresser, Bed, and Cabinet – Strong, Durable and Easy to Install
PERFECT FIT FOR VARIOUS FURNITURE — 1. Perfect Fit for Various Furniture: At 16 inches in height, these table legs elevate chairs, coffee tables, nightstands, cabinets, dressers, beds, sideboards, and more to an ideal height. Enhance comfort and make room cleaning more convenient with these versatile furniture legs.
Owfeel 6 Pcs Adjustable L-Shaped Furniture Feet, 7-12.2 Inch Metal Furniture Replacement Legs, Black Furniture Risers with Screwdriver, Support Legs for Bed/Sofa/Cabinet/Dresser/Table (6)
Adjustable Height:These furniture legs adjust from 7 inches (18cm) to 12.2 inches (31cm) by rotating the base, easily leveling your furniture on uneven surfaces. Please check the size details before purchase to ensure a perfect fit for your needs.
VEHCIL 6-inch Brushed Gold Furniture Legs, Legs for Furniture Set of 4 Modern Furniture Feet Metal Table Legs for Cabinet Sofa Couch Chair Bed Dresser Wardrobe Risers DIY Replacement
【Sleek & Elegant Design】 Set of 4 furniture legs with a tapered, brushed metal finish. Clean lines and strong metallic texture suit modern, mid-century, industrial, and minimalist styles—perfect as sofa legs, couch legs, or cabinet legs.
Laowu Table Leg Extenders for Folding Tables, Folding Table Legs Extensions for Straight and Bent Legs, Heavy Duty Steel 4 Levels Adjustable Folding Table Leg Risers, Raise Table Height
[Highly Recommend Table Height Extender] If you feel pain in your back/waist/neck when work standing behind standard folding table, The folding table risers is very important to you. Risers for table legs lifts folding tables to a comfortable and more back-friendly ergonomic height, Keep you in comfortable position and relieve the pressure on your back, neck and shoulders. The table leg extenders are designed with 4 adjustable heights 3.6in / 6.77in / 10in / 13in
Frebuta Premade Round Metal Desk Legs, 17 to 44nch Telescoping Round Office Table Legs Heavy Duty Set of 4 Stainless Steel Tube Portable DIY Furniture Screw in Table Legs Sturdy (31-44in)
【4Pcs Round Telescopic Table Legs】Table legs metal length from 30inch to 45inch, telescopic adjustable design. 4pcs 44inch furniture table legs meet your DIY needs for tables of different heights, DIY Premade Round Desk Legs make furniture design more flexible, 4 inch round panel, enough to support the desktop
VEVOR Adjustable Table Legs, 24-40 in Round Steel Furniture Legs, 1200 lbs Max Load Heavy Duty, Quick Installation, Ideal for Home Office Desk DIY, Coffee Dinner Bar Tables, Workbenches, 4 PCS, Black
Exceptional Load Capacity: Designed to support up to 1200 lbs / 544 kg, these table legs provide reliable strength for heavy tabletops or large storage builds, helping keep your table stable and maintain its shape over time
VEHCIL 4-inch Brushed Gold Furniture Legs, Legs for Furniture Set of 4 Modern Furniture Feet Metal Table Legs for Cabinet Sofa Couch Chair Bed Dresser Wardrobe Risers DIY Replacement
【Sleek & Elegant Design】 Set of 4 furniture legs with a tapered, brushed metal finish. Clean lines and strong metallic texture suit modern, mid-century, industrial, and minimalist styles—perfect as sofa legs, couch legs, or cabinet legs.
Teneyu Set of 2 Metal Table Legs 16 inch Height Coffee Table Legs Bench Table Legs for DIY Desk Legs with Adjustable Leveling Glides Ottoman Furniture Legs Easy Install Matte Black Finish
Premium 16-Inch Metal Table Legs:Elevate your coffee table, bench,or desk with these sleek 16-inch legs,offering the perfect height for comfortable use while adding modern industrial style to any space
Happybuy Hairpin Table Legs 34" Black Set of 4 Desk Legs 880lbs Load Capacity (Each 220lbs) Hairpin Desk Legs 3 Rods for Bench Desk Dining End Table Chairs Carbon Steel DIY Heavy Duty Furniture Legs
Durable Steel in Powder Coating: Our hairpin desk legs adopt three 3/8'' steel rods, making them more stable and stronger than 2 rods. Each leg can support max. 220 lbs/ 100 kg load without deformation (4 set legs up to 880 lbs loading). Finished with powder coating technology, the legs are glossy, rust-proof, and smooth to the touch. Stability and a clean appearance to stand up to anything.
YCCO Dining Room Table Bench Legs,Metal Coffee Table Legs 15-Inch,Furniture Legs for Bedroom End of Bed,Shoe Rack Bench for Entryway,Kitchen,Garden,Patio,Outdoor Indoor Porch,DIY Legs (H Shape,2 Pcs)
【Robust Iron Construction】:Our table legs measure 15" in height and 11" in width, and the set includes two metal legs, four adjustable feet, and the necessary screws. Crafted from durable 1.6"x0.8" square tubes, they offer a solid base for your furniture, supporting weights up to 150 pounds.
Likapop 16" Metal Coffee Table Legs, Sturdy Black Bench Legs, Suitable for DIY Furniture Legs, Dining Tables, End Table, Chair, Desks, and Benches - 40 cm H x 30 cm W, Set of 2 (16" V-Type)
DIY Furniture Legs: The V-shape design makes the table legs more modern and aesthetic, making the structure more solid. You can create more home DIY furniture projects. Perfect for making coffee tables, side tables, end tables, short tables, bench legs, computer desks, workbenchs, nightstands and more.
Orgerphy 16” Black Trapezoid Metal Bench Legs (2PCS) | Heavy Duty Furniture Legs for Bench| Mertal Table Legs| Screws and 4pcs Rubber Floor Protectors | Mid Century Modern Desk Legs Furniture Legs
MATERIAL:The 16” trapezoid bench legs are made of heavy-duty solid steel, and cold-rolled steel make the legs sturdier and more durable, Rust Resistant Powder Coat Finish, it will support up to 400 lbs. The legs are smooth and comfortable to the touch;
Geesatis 14 Inch Heavy Duty Adjustable Table Legs - Set of 4, 1000lbs Capacity, Aluminum Alloy Furniture Legs for Desks, Cabinets, Sofa & Bed with Pre-Attached Screws (Vintage Bronze)
Adjustable Height Range: 0-0.24 inch / 0-6mm. Dimension--Height: 14 inch / 35 cm. Plate Size: 3.1 x 3.1 inch / 8 x 8 cm. Plate Thickness: 3.8 mm / 0.15 inch.
