Diamond C16 Electric Hand Held Flush Cutting Hand Saw 120V/25Amp
Wet or dry cutting Overload protection with load warning LED light visible to the operator Electrical cord with PRCD protection Detachable guide rollers Spring-loaded splash guard to protect from water spray Handles designed for optimal control Tool-free blade guard angle adjustment Lightweight magnesium blade guard Externally accessible motor brushes Standard water feed system with fine adjustable flow and quick release coupling and durable hose
Makita GA5040X1 SJSII Angle Grinder with Tuck Point Guard, 5"
Powerful 10.0 AMP motor delivers more output and 11,000 RPM
VEVOR Electric Concrete Saw, 16 in, 3200 W Motor Circular Saw Cutter with Max. 6 in Adjustable Cutting Depth, Wet Disk Cutter Includes Water Line, Pump and Blade, for Stone, Brick
A Clean Wet Cut: The VEVOR electric concrete saw offers a better cutting experience and reduces lung damage by preventing debris from spreading during cutting operations. It also includes a wet-cutting attachment, which provides direct water spraying and eliminates the need for one-handed watering while cutting. This improves operational security and makes cutting easier.
Laguna MTSF236110175-0130
IMPORTANT FREIGHT DELIVERY: This item ships via LTL freight. A valid phone number is required to schedule delivery
DEWALT 20V MAX Planer, 30,000 Cuts Per Minute, 2 mm Cut Depth, Brushless Motor, Bare Tool Only (DCP580B)
Brushless Motor provides power and runtime
VEVOR Electric Concrete Cutter, 9 in Circular Saw with 3.5 in Cutting Depth, Wet/Dry Disk Cutter Includes Water Line, Pump and Blade, for Stone, Brick, Porcelain, Concrete, 1800W Motor
Wet Cutting without Dirt: VEVOR electric concrete saw provides a better cutting vision by avoiding the debris that spreads around in traditional cutting operations. Plus, it comes with a wet-cutting attachment, ensuring direct water spraying, eliminating the need for one-handed watering and cutting, and improving operational security.
14% discount
Evolution R230DCT - 9 in Concrete Saw (Circular, Angle Grinder, Cut Off Saw) - 15A Motor, No Gas - 3-1/2 In Cut - Incl Diamond Masonry Blade
Safer & more practical cutting vs a grinder
WORKPRO 16 Inch Wet Concrete Saw with Water Cutting Attachment, 1600W 3100RPM Electric Concrete Saw, Max Cutting Depth 6.69", Ideal for House, Foundation, Courtyard Renovation
Please note: The included diamond blade is not suitable for cutting wood. If you need to cut wood, please replace the blade. Always wear safety gear such as goggles and gloves during use, and be sure to connect a water hose while operating
11% discount
Wall Grooving Machine, Channels Cutter, Concrete Cutting Machine for Cutting Slotting Marble Concrete Grooves 110V(Red)
Concrete Cutting Machine - designed to carve into masonry&concrete a small channel to insert a metal or plastic conduit for electrical wiring
VEVOR Wall Chaser, 4800W Slotting Machine with Laser Guide 6500rpm, Max Groove Depth and Width 1.6" x 1.65", Concrete Grooving Cutting Machine with 5 x 5" Saw Blades and Dust Control Accessories
Powerful & Efficient Groove Cutting: Load up to 4800 watts of power, Vevor wall chaser can deliver up to 6500 rpms, letting you cut marble, concrete, lumber and bricks, providing a maximum cutting width of 42mm and a cutting depth of 41mm.
Hoteche Wall Groove Cutting Machine 1100W Electric Wall Chaser 1-Inch Groove Slotting Machine for Masonry & Brick
ãHigh-Powered Performance for Precision CutsãEquipped with a 1100W motor and a no-load speed of 1600rpm, this Wall Groove Cutting Machine delivers powerful, consistent performance for cutting precise grooves in masonry and bricks. Ideal for professional contractors and DIY enthusiasts alike
VEVOR Wall Chaser, 4800W Slotting Machine with Laser Guide 6800rpm, Max Groove Depth and Width 2" x 1.5", Concrete Grooving Cutting Machine with 5 Saw Blades and Water Pump
Powerful & Efficient Groove Cutting: Load up to 4800 watts of power, Vevor wall chaser can deliver up to 6800 rpms, letting you cut marble, concrete, lumber and bricks, providing a maximum cutting width of 2.05â and a cutting depth of 1.5â.
Makita 4100KB 5" Dry Masonry Saw, with Dust Extraction
Powerful 13 AMP motor delivers 12,200 RPM for the most demanding applications
DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)
Brushless motor allows you to cut up to 369 linear feet of 3/4 in. OSB using DCB205 battery (sold separately)
Huanyu Electric Wall Chaser 1 time Molding Wall Groove Cutting Machine Infrared Sighting 4800W Cutting Width 40mm Depth 40mm Wall Chaser Concrete Cutter Magnesium Alloy for Cement Brick Marble 110V
Aviation Grade Magnesium Alloy: Reduce overall weight by 30% with higher strength. 4800W pure copper wire motor with strong power. The motor dissipates heat quickly to prevent machine from being damaged by excessive temperature when running at high speed. Not easy to trip. Cutting Width:40mm/1.57in. Cutting Depth: 40mm/1.57in (adjustable) Rotating Speed: 9000rpm
Metabo HPT MFE 40 Wall Chaser For Concrete, 5-Inch Cutting Disc, 15 Amps, High-Power Drive System, Tacho-Constamatic Electronics, Dust Protection, Torque Limiting Clutch, Made in Germany, 646040620
HIGH-PERFORMANCE WALL CHASER: This 5" Metabo HPT electric wall chaser and concrete cutter is designed for routing channels for electrical wiring, cables, and empty pipes into plaster, concrete, and masonry with cutting depths up to 1 9/16" (40 mm).
TIEKJOT Electric Wall Groove Cutting Machine Chaser Concrete Grooving Cutter 110V for Brick Slotting With 5Pcs 5Inch Saw Blades 4800W Power Masonry Saw Infrared Sighting and Dustproof
One Time Forming 360 ° Slotted: The wall chaser is designed with 2 adjustable handles,one rotate 180°,the other one rotate 90°,depth and width can be controlled randomly.90 degrees can also be cut.Max width:40 mm/1.57 inch,Max deepth:42 mm/1.65 inch.Without any auxiliary tools and the second process
Electric Wall Chaser Groove Concrete Cutting Machine, 1100w Electric Wall Groove Cutting Machine, 1600 Rpm Concrete Cutting Slotting Machine,15-30mm Adjustable Depth
15-30mm Adjustable Grooving Depth: Our wall chaser concrete cutter features a depth adjustment range of 15-30mm, allowing you to customize the groove depth to meet various construction needs. A powerful and versatile tool designed for cutting grooves in hollow bricks, foam, aerated bricks, and more
Huanyu Electric Wall Chaser 25mm+35mm Blades Upgraded 1 time Molding Wall Slotting Machine No Dust Operation Wall Groove Cutting Machine Cement Sand Brick Cutter 110V (25mm+35mm)
2 Blades Equipped: Cutting depth: 25mm/35mm. Cutting width: 30mm. Wear-resistant carbide blade + rotating shaft, non-slip. 1100W strong power. Fast heat dissipation. Aluminum alloy shell, sturdy beautiful
Wall Chaser, 1800W Slotting Machine 7000rpm, Max Groove Depth and Width 1.46" x 1.97", Electric Concrete Grooving Cutting Machine with 2 Saw Blades and Water Pump
[Excellent Performance] - This wall chaser equipped with a 1800W all-copper motor that spins at up to 7000rpm, providing powerful grooving power. In addition, the machine is equipped with reinforced, high-hardness diamond alloy blades that are heat resistant, sharp, and durable to cut hard objects with ease.
CS Unitec EMF 180.2 7" Diameter Diamond Blade Wall Chaser/Slotter
This wall chaser is ideal for laying of cable, conduit or pipe on renovation jobs
6% discount
ZXMOTO Wall Groove Cutting Machine +Carry Box 110V 4800W,With 5 PCS Saw Blades Wall Slotting Machine Electric Wall Chaser for Brick Granite Marble Concrete 42MM Cutting Width/41MM Cutting Depth
Specifications - Voltage 110v, Rated Power: 3000W/Load Power: 4800W, rated speed 6200r/min.
DYRABREST 4800W Electric Wall Chaser Wall Groove Cutting Machine Concrete Groove Cutter Slotting Machine with 5 Pieces 5.23" Saw Blades for Brick Granite Marble Concrete, 42mm Cutting Width
ã4800W Powerful Motorã: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
YUCHENGTECH 4800W Wall Chaser Concrete Cutter Wall Grooving Cutting Machine Chaser Electric Wall Chaser Cutting Machine Wall Grooving Cutter With Infrared Sighting Line
1.ãMulti-dimensional adjustment cuttingã: Just use a wrench to adjust the nut of the machine to adjust different ranges according to your needs, the cutting depth can be adjusted in the range of 1-42mm, and the cutting width can be adjusted in the range of 0-40mm.
110V 1100W 2000RPM Channels Cutter Concrete Cutting Machine Wall Chaser Slotting Machine for Cutting Slotting Marble Concrete Grooves_AB
ãSpecificationsãVoltage: 110V/60HZ; Max Power: 1100W; Speed: 1600R/MIN; Slot width: 25-35mm; Slot depth: 15-30mm.
LIYUANJUN Wall Groove Cutting Machine, 1100W Electric Concrete Saw Handheld Wall Chaser Brick Cement Slotting Machine Red Brick Notcher Groover for Cement Cover Wall
ãWidely ApplicableãThis wall groove cutting machine is suitable for walls of different materials, such as red bricks. Sand bricks. brick. water bricks. Cement wall.
27% discount
Evolution Power Tools R300DCT 12 inch Concrete Saw (Aka Circular Saw, Angle Grinder, Chop / Cut Off Saw, Demo Saw, Disc / Power Cutter) Electric Motor, No Gas - 4-1/2" Cut - Incl Diamond Masonry Blade
HUGE CUT CAPACITY - Cuts up to 4-1/2â (115mm) deep. That's more capacity than most leading petrol saws
Huanyu Electric Wall Chaser Upgraded 25mm+35mm Blades 1 time Molding Wall Groove Cutting Machine No Dust Operation Slotting Machine Cement Sand Brick Cutter Carry Box 110V (25+35mm)
Aluminum Alloy Shell: Beautiful. Wear-resistant carbide blade + rotating shaft, non-slip, strong power. Motor dissipates heat quickly to prevent machine from being damaged by excessive temperature when running at high speed. Cutting Depth: 25mm/35mm (According to the blade, both are provided). Width: 30mm. 1100W 110V
XtremepowerUS 3200W Electric 16" Circular Saw Concrete Saw Wet/Dry Concrete Cutter 20AMP With Water Line Attachment Wet Concrete Saw (Blade Included) Ideal for DIY House, Foundation
Lightweight and Powerful - The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
1100W Electric Brick Wall Chaser Floor Wall Groove Cutting Machine
High Power Motor: The 1100W Electric Brick Wall Chaser Floor Wall Groove Cutting Machine features a high-power motor, providing a powerful and efficient cutting performance.
Wall Groove-Cutting Machine, 1100W 110V Electric Brick Wall Chaser Handheld Electric Groove Cutting Machine Concrete Cutting Slotting Machine with Dust Extraction Port for Cutting Slotting Marble
Build to Last: This machine is made of high-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to corrosion, abrasion, and impact.
Rubi DCX-250 1550 Xpert 61" 2hp 120V Rail Saw
Reinforced aluminum chassis with an innovative triple beam system and steel sides which improves stability directly resulting in a better cut finish
24% discount
Drywall Sander, 1000W Popcorn Ceiling Removal Tool, Automatic Drywall Sander with Vacuum Dust Collection, LED Light, 6 Variable Speed 800-2200RPM, Foldable & Extendable Handle,15Pcs Sanding Discs
[1000W Pure Copper Motor & 2200RPM High Efficiency - Works Perfectly in Any Scene] High-power high-speed electric drywall sander provides powerful power and easy and even sanding of walls or ceilings, with 6 adjustable speeds between 800-2200RPM to meet all your different polishing needs. Perfect for sanding drywall, painted walls, ceilings, cement walls, paint coatings, and loose plaster.
ZXMOTO 110V Wall Groove Cutting Machine w/Carry Box 4800W Wall Slotting Machine Electric Wall Chaser for Brick Granite Marble Concrete Cutter Notcher Groover
One Time Molding: Fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases .Without any auxiliary tools and the second process. Cutting groove depth can be randomly controlled.
23% discount
4800W Electric Concrete Saw, 5500 RPM Wet/Dry Tile Circular Saw Cutter Tool with 8â Diamond Blade and Dual-Nozzle Water Fed Dust Suppression for Wall Stone Concrete Brick, 2.8â Depth
Electric Concrete Saw features a robust 4800W motor and an 8â diamond blade, delivering a rotating speed of up to 5500 RPM, a cutting depth of 0-2.8â, and a cutting angle of up to 270°
Electric Wall Chaser Concrete Cutter Groove Cutting Machine For Brick Grooving Slotting Groover Power Masonry Saw With 5 Saw Tool Granite Marble Grooves 36Mm 7000Rpm 1800W (Black Red)
Sturdy and Durable: The concrete grinder is made of high-quality aluminum, copper, nylon, steel, and other materials for long service life, and the diamond blade has high sharpness and durability for cutting various materials
Raimondi Gladiator 130 51" Wet Tile Bridge Saw WSGLA130
Naitmsad
12000W Concrete Ring Saw, 3000rpm Concrete Saw Electric, 16â³ Wall Chaser Cutting Machine, Toroidal Cutter with Water Fed Dust Suppression for Brick Granite Rebar and Marble
ã12000W Concrete SawãThe electric wall groove machine concrete cutter is equipped 2.5m power cord, with an intelligent water pump,which automatically adds water cutting when slotting, preventing debris splashing reduces lung damage. Allows you to cut 2m of concrete in 3 minutes.
TECHTONGDA Electric Concrete Saw Wall Cutter Wet Dry Cutting with 2 pcs Guide Rail 47.2inch Long 20inch Deep Ί47.2inch Saw 220V
ãBlade Feed AutomaticallyãTo ensure the safety of operators, the blade of concrete wall cutter can slide along the rail automatically, with adjustable feeding speed. You can also control the movement of the blade manually. The cutting depth can also be adjusted by the hand wheel. The maximum cutting depth of 20 inches. You can also choose to control the movement of the blade manually.
13% discount
ddingsmafosee, smafoseedding,Heavy-Duty Electric Diamond Concrete Chain Saw
ãEfficient Cuttingã: The new ddingsmafosee,smafoseedding Electric Concrete Cutter Saw
WYDDDARY Electric Concrete Saw Wall Cutter 47.2inch Saw Cutter with 20 inch Cutting Depth Wet Dry Disk Saw Cutter with 2 pcs Guide Rail 220V 7580W
ãAutomatic Blade AdvanceãFeaturing a safety-designed automatic blade feed system, this concrete saw glides effortlessly along the guide rail with adjustable speed control, minimizing manual effort while ensuring precise, up to 20-inch deep cuts.
Husqvarna K970 16" Power Cutter
Light and Powerful All Around Cutting Performance.
6% discount
ddingsmafosee
ãEfficient Cuttingã: The new Electric Concrete Cutter Saw
VNATWGOO 220V Industrial Dustless Wall Chaser Machine, 8300W Electric Groove Cutter for Concrete, Brick, Marble
ãADJUSTABLE WIDTH & DEPTH CONTROLãTailor your cutting precision with 5 interchangeable blades for 0-40mm width flexibility and 0-53mm depth adjustment. Designed for concrete, marble, and brick walls, this chaser saw effortlessly handles diverse channel dimensions across tough using its reinforced cutting mechanism.
DUYIWAA Wall Groove Cutting Machine, 110V 1100W Electric Floor Wall Chaser, Groove Concrete Cut Slotting Machine, Handheld Floor Brick Wall Chaser Groove Tool
- Widely Application: Adapt to different materials of wall, such as: red brick, Sand brick, Brick, Water brick, Cement cover wall.
Wall Groove Cutting Machine, Electric Concrete Saw Handheld Wall Chaser Brick Cement Slotting Machine, 0.59-1.18 Inch Depth Adjustable Concrete Cutter for Cutting Slotting Marble Concrete Grooves
ãWall Groove Cutting MachineãPowered by a 1100W motor, this machine is equipped with a professional rotating shaft and a high-performance cutter head, boosting grooving efficiency and reducing both time and effort.
RUBI | Electric Cutter and Miter Saw DCX-250 Xpert 1250 Cutting Lenght 49 3/16"| Table Saw For Cutting of Natural Stone such as Marble or Granite | Circular Tile Wet
Table saw cutting length 49 1/4 in. Diagonal cutting lenght 52 3/8 in. Revolutions per minute 3350. Power supply 120 V - 60HZ. Mitre Thickness cut 1 in
TECHTONGDA Electric Concrete Saw Wall Cutter Wet Dry Cutting with 2 pcs Guide Rail 47.2inch Long 16inch Deep Ί39.4inch Saw Quick Disassembly 220V
ãBlade Feed AutomaticallyãTo ensure the safety of operators, the blade of concrete wall cutter can slide along the rail automatically, with adjustable feeding speed. You can also control the movement of the blade manually.
Electric Wall Grooving Cutting Machine Chaser 1100W Handheld Wall Slotting Machine Concrete Wall Chaser w/ 1in Groove Width & Max 1.2in Depth for Concrete, Bricks, Electrical Installation
ãWide Applicationsã- Hysinwier Concrete groove cutting machine is suitable for grooving light bricks such as hollow bricks, foam turnings, aerated bricks and white bricks. With its excellent performance, it becomes a good choice for your slotting tool, widely used on construction sites, home decoration, road renovation, and cement factories.
5% discount
HUSQVARNA CONSTRUCTION K970 II 16In Gas Pow
Sold on Amazon
Heavy Duty 12000W Concrete Ring Saw New Wall Chaser Concrete Cutter, 30cm/11.81in Deep Cut Electric Power Tool with 2 Diamond Blades for Rebar, Brick, Tile, Stone, Dust-Free Wet Cutting
1â£1â£ã2025 Upgraded Electric Concrete Saw with 2 BladesãBoost jobsite efficiency with our 12000W high-power concrete ring saw. Features a pure copper motor (no carbon brushes) and includes 2 diamond blades for concrete, steel, tile, and stone. Cuts 2 meters in 3 minutes with a 30cm depth at 90°âperfect for wall chasing, reinforced concrete, and granite.
Husqvarna Construction K970Iii 16 in. Power Cutter
Smart tension, is a semi automatic belt tensioning system that allows easy belt change and easy belt tension.
Handheld Wall Groove Cutting Machine, 1100W 2000RPM Electric Wall Chaser Slotting Machine Max Groove Depth and Width 1.18" x 0.98", Concrete Grooving Cutting Machine for Cutting Slotting
ãSpecificationsãVoltage: 110V/60HZ; Max Power: 1100W; No-load speed: 1600R/MIN; Slot width: 25mm (0.98in); Slot depth: 15-30mm/0.59-1.18inch;
TECHTONGDA Electric Concrete Saw Wall Cutter Wet Dry Cutting with 2 pcs Guide Rail 47.2inch Long 12.6inch Deep Ί31.5inch Saw 220V
ãBlade Feed Automaticallyã To ensure the safety of operators, the blade of concrete wall cutter can slide along the rail automatically, with adjustable feeding speed. You can also control the movement of the blade manually. The cutting depth can also be adjusted by the hand wheel. The maximum cutting depth of 12.6 inches. You can also choose to control the movement of the blade manually.
Saw Concrete Wall Cutter 3000RPM Brushless Portable Cutting Machine Dust-free Stone Ring Saw Cutting Depth 27cm,Incl Water Line,Pump,Blade
ãPowerful Powerã: Concrete ring saw adopts a powerful 8800W brushless pure copper motor with a speed of up to 3000 rpm. The power is strong and stable, the slotting is efficient, time-saving and labor-saving, the pure copper motor has 360° all-round heat dissipation, and there is no need to worry about machine damage during high-intensity continuous operation, and it is safe to use.
Acu-Cutter 500 Foam Saw w/ 8" Blade
Dual Reciprocating Blades
Acu-Cutter 350 Foam Saw w/ 8" Blade
Volts: 120 AC, Amps: 4.5
Concrete Cutting Saw, 2000rpm, Track, With 70mm Aluminum Alloy Guide Rail, 30cm Depth, One-Button Lifting, 2600rpm, For 150cm(300cm)
ã8800W CONCRETE CUTTER KITã Cut the holes of doors and windows as you like! Our new concrete cutting kit is composed of 8800W adjustment-free ring saw + fully automatic ring saw track. The cutter can be used with the guide rail and can be easily fixed on the wall and other places. And the guide rail is equipped with a 150W powerful pure copper motor, which has reliable power and can achieve smooth and efficient slotting and cutting without lifting.
ToolTuff 14" Gas Powered Concrete Demo Saw
14-inch diamond cutting blade
BIHUI Tile Beater with Digital Control Panel & Extra Battery
Allows for even adhesive distribution under tiles & big slabs during installation
220V Electric Wall Chaser Groove Cutting Machine Wall Slotting Machine 4KW 33MM
Magnesium alloy head shell, 4000W high power.
110V/9500W Concrete Wall Chaser | 16''Concrete sierra de anillo para concreto | Masonry tools | Wet Cutting System, Max Depth 11.4" | for Ring Saw and Concrete Cutting
ãHIGH-POWER 9500W PERFORMANCEãThis concrete cutting saw features a robust 8980W toroidal motor operating at 3000 RPM, enabling ultra-deep cuts up to 29cm (11.4"). Its diamond-enhanced blade effortlessly slices through 2 meters of concrete in just 3 minutes, handling stone, rebar, porcelain and other tough materials with ease
Electric Brushless Motor Dust-free Concrete Saw - 8800W/6000 rpm, 18.89 inch Depth of Cut for Slotting Brick & Marble
ãPowerful Brushless Concrete SawãOur concrete chainsaw is equipped with an 8800W powerful brushless motor, which has low energy consumption, low noise, long service life, and is maintenance free. The motor speed is 6000 rpm, and the operation is smooth and flexible. Pure copper motors have strong heat resistance, ensuring that concrete cutting saws never burn out.
9% discount
4200W Electric Wall Chaser, 110V Wall Grooving Concrete Cutting Machine, Dust-Free Concrete Cutter with 5PCS 5â Saw Blade, Infrared Line Sighting & Water Pump, Max 42mm Cutting Depth/Width
Quick & Clean: Wall Chaser operates at 6500RPM, suitable for cutting concrete walls, red bricks, cinder bricks, ceramic tiles, marble, and other super-hard walls, capable of grooving a 90° dead angle, making it ideal for decoration engineering projects
110V 4800W Electric Wall Groove Cutting Machine Wall Chaser for Brick Concrete Grooving Slotting Power Masonry Saw With 5Pcs 5 Inch Saw Blades (Black)
High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this electric concrete saw has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out
Makita 4114X 14" SJS⢠Electric Angle Cutter, with 14" Diamond Blade
SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
Saw Trax BLEXT 28 in. Saw Panel Builder's Extension
Set includes two 28" fence extensions
Makita 4114 14" SJS⢠Electric Angle Cutter
SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
Metabo 604040620 Concrete Cutting Grinder
Ideal for electronic installation for wiring cables and empty pipes under plaster with cutting depths up to 40 mm
MK Diamond 169658 Saw Tent
Designed to contain spray and debris when cutting tile or masonry material
CS Unitec | EPF 1503 | Concrete Scouring Machine, Plaster and Paint Remover - Made in Germany
Ideal for professional renovation projects - roughen, descale, abrade, clean and texturize
Ky-xysmgs High-Frequency Brush-Type Circular Saw High-Power Handheld Concrete Wall Cutter 110V 16-Inch Dust-Free Cutter 9500W 1/2 Saw Blades(2 blades)
Dust-Free Cutting with Water Pump: Equipped with an intelligent interlocking water pump system, the water flow precisely flushes the saw blade's cutting surface, suppressing dust at its source to achieve dust-free cutting operations. This provides enhanced safety for construction personnel.
2800W Electric Wall Groove Cutting Machine,Wall Slotting Chaser Tool 36MM
[Durable Multi-Material Construction] Crafted from aluminum, copper, nylon, and steel components, this cutter maintains performance through demanding applications. The diamond blade maintains sharpness for various material types.
16" Concrete Saw with 2 premium blades,8960W/110V Max Cutting Depth 13.8" Electric tile cutter for brick, concrete, marble, rebar
Power through the toughest materials with our ELECTRIC Tile Saw! This cutting machine delivers 8980W of raw cutting power, slicing through CONCRETE, granite, and stone like butter. No job is too hard
7% discount
YJINGRUI 110V Electric Wall Planer Handheld Power Wall Scraper Wall Shovel Machine for Wallpaper Paint Putty, 90° No dead Angle
[ High Efficiency ] 20~40 square per hour, 8 times faster than traditional wall planer tools. With 1200W pure copper motor, the maximum speed can up to 3000rpm. A set of cutting head containing 26 alloy tungsten steel blades can cut the width of 5.9in/150mm at a time.
Industrial 8300W Masonry Cutting Tool, 220V Wall Groove Cutter with Cooling Tech for Tile/Marble
ADJUSTABLE WIDTH & DEPTH CONTROL Tailor your cutting precision with 5 interchangeable blades for 0-40mm width flexibility and 0-53mm depth adjustment. for concrete, marble, and brick walls, this chaser saw effortlessly handles diverse channel dimensions across tough using its reinforced cutting mechanism.
4800W Electric Wall Groove Cutting Machine, Wall Chaser, for Brick Concrete Grooving Slotting, Power Masonry Saw, with 5Pcs Saw Blades
ãDust-free CuttingãElectric concrete saw the water pump with a hose can supply water quickly, improve cutting efficiency, reduce dust splashing during cutting, lower the temperature of the saw blade while extending its service life, and protect the user's health. You can also adjust the water flow through the outflow head.
Huanyu 25mm Replacement Blade Suitable for Huanyu Electric Wall Chaser
Size:25mm
INTSUPERMAI Paving Tool Block Splitter with Wheels Concrete Landscaping Stone Brick Cutter
ãApplicationãIt is suitable for cutting kerbstone,footpath brick, air bricks and fired bricksand so on. No power supply, manual operation, easy to use and high efficiency.
Stark USA 6.5HP Walk-Behind Concrete Floor Cement Cut Off Saw Cutter 14" Gas Circular Cement Cut Off Saw Masonry Brick
Perfect for smaller jobs such as sidewalks, driveways and city streets and offers a productive push saw with excellent weight distribution, stability and enhances maneuverability
6% discount
110V/220V Concrete Saw 16 inch Concrete Ring Saw, 9500W/12000W Electric Concretes Saws Concretes Cutter, Cortadora de Concreto, Depth of cut 11.8inch, for Stone, Brick and Marble (12000W, 2blades)
ã9500W/12000W UPGRADED ELECTRIC CONCRETE SAWã:The electric concrete saw is powered by a strong pure copper motor that runs at a fast speed of 3300 rpm.With strong and stable power, efficient slotting, time-saving and labor-saving, electric concrete saw with 360 ° all-round heat dissipation, no need to worry about damaging the machine under high-intensity continuous work (NOTE: The wiring connected to the electrical meter box must use 4-6 square cable. Given the high power of electric saws, 6 square wiring is generally recommended. Smaller gauge wire will be unable to handle such high power loads)
WEIMILOR 8900W Concrete Ring Saw, 16in/20in/24in Brushless Motor Concrete Saw with Water Fed Dust Suppression, 3300RPM Electric Wall Slotting Machine, for Concrete, Rebar, Bricks,20in/50cm
ãPROFESSIONAL CUTTING RING SAWãThe electric concrete ring saw cutting machine is equipped with a 16In/20In/24In(Optional)high-quality thickened titanium alloy saw blade and a powerful cutting depth of 12In/16In/20In. It can quickly, smoothly, and smoothly complete wall groove cutting, and the cutting depth can be freely controlled without the need for any auxiliary tools or a second process.
Circular Saw Track Guide, 150w Linear Rail, With Rotating Rocker, Adjustable Cutting Depth, One-Button Lifting, Suitable For Reinforced Concrete, Red Brick Walls(150cm)
ãFULLY AUTOMATIC WALL CUTTING TRACKã Cut door and window holes as you like! Our fully automatic wall cutting track adopts a new upgraded design, equipped with a 150W high-probability pure copper motor, remote control lifting. It is also equipped with a cutting machine fixing frame, which can be used with various types of slotting machines, which can effectively avoid manual lifting, achieve horizontal and vertical precise cutting, and save time and effort to use.
XtremepowerUS 3000W Slotting Machine Wall Chaser Concrete Grooving Cutting Machine Saw Blades Water Pump Sighting w/Case
Wide Application - Versatile and powerful, electric wall chaser can easily cut narrow channels into brick, stone or concrete walls for installation of in-wall electrical sockets, conduits, water pipes, etc, perfect for electricians and plumbers.
chengxiaorui 12000W Heavy Duty Concrete Ring Saw - Concrete Saw 16 Inch Wall Chaser Concrete Cutter, Wet Cutting Electric Saw, 2 Diamond Blades, 30cm Cut for Rebar/Brick
1. 12000W Industrial Brushless Motor: 360° heat dissipation, 3000-4000RPM high speed cuts 2m brick wall in 3 mins (30% higher efficiency). 2Ã16-inch nickel-plated diamond blades ensure zero jamming on reinforced concrete/granite.
Ring Concrete Saw, 9500W Toroidal Electric Concrete Saw Cutting Machine with 16-Inch Blade, Intelligent Water Pump, for Brick/Block/Roof, Dust-Free Concrete Chain Saw for Cutting Holes/Windows/Doors
Powerful Motor & Efficient Cutting: Equipped with a high-performance 8090W/9500W pure copper motor, delivering 36000 RPM no-load speed. Cuts through reinforced concrete, brick, and aerated blocks like butter, significantly improving work efficiency.
Heavy-Duty Chain Saw, Concrete Cutting Chain saw bundled with Concrete Cutting Diamond Chain, Guidebar and Sprocket(480)
ãEffective Cuttingã: New electrical concrete cutter saw, by avoiding debris spread in traditional cutting operations, provides better cutting vision and less lung damage.
Electric Concrete Saw 16 Inch with 2 Blades, 9500W/12000W Concrete Ring Saw Toroidal Wall Cutter Machine with Water Fed Dust Suppression for Granite, Porcelain, Bricks, Marble 12000W
ãProfessional CuttingãElectric concrete ring saw cutting machine uses a powerful 9500W/12000W pure copper motor, and equipped with 2pcs 16inch diameter diamond saw blade with a maximum cutting depth of up to 12inch; With an ultra-fast speed of 3000 RPM, it can quickly and smoothly complete the wall groove cutting; Depending on the material, the cutting speed can reach up to 2.0 m/3 min
Concrete Saw, Electric Concrete Chain Saw, 110V/3000W Wet Water Supply Dust Removal Handheld Wall Groove Machine with Water Pump, for Cutting Brick, Steel Bars, Cement, etc (Cutting Depth 18.81IN)
PROFESSIONAL DEEP WALL CUTTING : The electric handheld concrete saw uses high-quality diamond chains, which are more suitable for cutting deeper wall grooves. The maximum cutting depth of the two models is 13.77 inches and 18.89 inches respectively. It can quickly and smoothly complete wall groove cutting, and the cutting depth can be freely controlled without any auxiliary tools or secondary trimmin
16" Electric Concrete Saw, Cut Depth11.81", 9800W Handheld Concrete Ring Saw, with Water Fed Dust Suppression, High Strength Diamond Cutter Head, for Stone, Rebar, Brick
Efficient: This 16-inch concrete ring saw cutting machine is equipped with a 410mm/16-inch high-quality thickened titanium alloy saw blade, and the cutting depth can reach 300mm/11.81 inches. It supports multi-angle cutting and can complete the wall grooving cutting quickly, smoothly and smoothly
RustyVioum Wall Chaser 110V 1100W Handheld Concrete Cutting Slotting Machine 2000RPM Electric Brick Wall Chaser Groove Cutting Device
ãHigh quality materialãThis wall groove cutting machine is made of high-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to corrosion, abrasion, and impact.
Concrete Saw, Electric Concrete Chain Saw, 110V/3000W Wet Water Supply Dust Removal Handheld Wall Groove Machine with Water Pump, for Cutting Brick, Steel Bars, Cement, etc (Cutting Depth 13.77IN)
PROFESSIONAL DEEP WALL CUTTING : The electric handheld concrete saw uses high-quality diamond chains, which are more suitable for cutting deeper wall grooves. The maximum cutting depth of the two models is 13.77 inches and 18.89 inches respectively. It can quickly and smoothly complete wall groove cutting, and the cutting depth can be freely controlled without any auxiliary tools or secondary trimmin
Ring Concrete Cutter Saw, Concrete Saw 20 Inch, 110V Pure Copper Motor with an Intelligent Water Pump for Reinforced Concrete, Ceramic Tiles, Red Brick Walls(110V,Depth of Cut 19.68nch)
ãOptimised DesignãThis ring concrete cutting saw has a new design that makes it easier to use. The no-adjustment design is very friendly for beginners and reduces the failure rate, cuts stone as smoothly as cutting butter, 2 metre cuts in just 3 minutes, reduces work time and increases work efficiency.
ZXMT 4800W Wall Groove Cutting Machine 110V 40MM Electric Wall Chaser Concrete Cutter Notcher Groover Slotting Machine
Time and cost saving: ready groove in one working step, 110V/50Hz, 6500-rpm carbon-brush motor and up to 4800W engine power is powerful enough to cut marble.
Concrete Saw, 8900W High-Power Electric Concrete Edge Cutting Machine, Wet Dust-Free Edge Circular Saw with Water Pump, for Cutting Stones, Steel Bars, Bricks, etc (110V, Cutting Depth 8.27IN)
ãPowerful Performance 0utputã:The concrete edging cutter features an 110V/220V pure copper motor brushless with 8900W/3000r/min speed, wth superior heat resistance, it minimizes the risk of overheating and burnout.Smooth and smooth operation, with a flat and smooth cutting surface, meeting high-precision engineering requirements
Ring Concrete Cutter Saw, Concrete Saw 20 Inch, 110V Pure Copper Motor with an Intelligent Water Pump for Reinforced Concrete, Ceramic Tiles, Red Brick Walls(110V,Depth of Cut 15.74inch)
ãOptimised DesignãThis ring concrete cutting saw has a new design that makes it easier to use. The no-adjustment design is very friendly for beginners and reduces the failure rate, cuts stone as smoothly as cutting butter, 2 metre cuts in just 3 minutes, reduces work time and increases work efficiency.
Cbhfmljd 110V Wall Slotting Machine, Handheld Electric Brick Wall Chaser Groove Cutting Device 1100W Electric Floor Wall Chaser Groove Concrete Cutting Slotting Machine 2000R/MIN
ãSpecificationsãCutting Blade: 170MM. Voltage: 110V/60Hz. MAX Power: 1100W. No-load speed: 2000R/MIN. Slot width: 35MM. Slot depth: 30MM(Adjustable). Depth of the blade: 1-2.5mm. Width of the blade: 170mm.
Ring Concrete Cutter Saw, Concrete Saw 20 Inch, 110V Pure Copper Motor with an Intelligent Water Pump for Reinforced Concrete, Ceramic Tiles, Red Brick Walls(110V,Depth of Cut 11.81inch)
ãOptimised DesignãThis ring concrete cutting saw has a new design that makes it easier to use. The no-adjustment design is very friendly for beginners and reduces the failure rate, cuts stone as smoothly as cutting butter, 2 metre cuts in just 3 minutes, reduces work time and increases work efficiency.
12000W Ultra-high Power Electric Concrete Saw Chaser Cutting Machine, Concrete Ring Saw with 2 Diamond Blades, Brush DC Motor Deep 11.81in Cut, Dust-Free Cutting for Concrete, Rebar, Tile & Stone
1â£1â£ã2025 Upgraded Electric Concrete Saw with 2 BladesãBoost jobsite efficiency with our 12000W high-power concrete ring saw. Features a pure copper motor (no carbon brushes) and includes 2 diamond blades for concrete, steel, tile, and stone. Cuts 2 meters in 3 minutes with a 30cm depth at 90°âperfect for wall chasing, reinforced concrete, and granite.
Bonoutil Electric Wall Chaser 25mm+35mm Wall Groove Cutting Machine Adjustable Cutting Depth Grooving Slotting Machine No Dust Cement Sand Brick Cutter 110V
[25mm+35mm! Wear-Resistant Carbide Blade] 2 blade sizes for your needs. Engineered for precise, efficient cutting, saving time & effort. No second cut needed. Heavy-duty rotating shaft, built to last. High-grade aluminum alloy shell, sturdy & beautiful
Electric Concrete Chain Saw, Wall Cutter Machine, 5800/6500w Diamond Concrete Chain Saw, Wet Water Supply Dust Removal, Handheld Concrete Saw 14"/19", 2 Chains/2 Guide Bar (350)
â¶ãNEW ELECTRIC CONCRETE CHAIN SAWã: Diamond concrete saw. Include 350/480mm models, 0-6000r/min speed, 5800W/6500W power, and a maximum cutting depth of 35cm/48cm. Weighing 13KG/14KG, it's designed for efficiency and precision in wall groove cutting. It can cut easily without sparks, with low loss, stable operation, and time-saving and labor-saving
ZIJINGM Electric Wall Slotting Machine, Wall Slot Cutting Machine, Wall Slotting Machine Concrete Wall Cutting Machine with Tool Box(110v)
Portable: The slim handle of this wall slotting machine is easy to control and easy to operate. The soft rubber-wrapped handle feels comfortable to hold, and the machine can be hung on the wall when it is running without falling. Ergonomic design.
1100W Electric Wall Grooving Machine, 15-30mm Adjustable Depth Slot Cutter, 1600r/min for Hollow Bricks Aerated Bricks Foam Blocks
High-Performance 1100W Motor: Powered by a durable pure copper motor delivering 1100W of power with no-load speed of 1600r/min. Designed for efficient grooving in lightweight bricks such as hollow bricks, aerated bricks, and foam blocks. Slot width: 25mm; depth adjustable from 15-30mm (0.59-1.18in).
Ring CIoncrete Cutter Saw, Cutting Against The Wall Concrete Saw 10.62 Inch, 110V/220V Pure Copper Motor with an Intelligent Water Pump for Ceramic Tiles, Red Brick Walls(Depth of Cut 8.26 in,110V)
ãCorner-Optimized DesignãEngineered for tight spaces where traditional saws canât reach! Our ring concrete cutting saw features an innovative, no-adjustment designâideal for beginners and pros alike. Glide through tough materials with ease, making smooth, precise cuts in hard-to-access areas like door frames, window openings, and staircases. Work smarter, not harder!
VICSEC 8'' Electric Concrete Saw 4800W Wall Chaser Concrete Cutter for Brick, Concrete Wall, Granite, Marble, Tile with 8" Saw Blade, Water Pump, Water Hose
The cutting range of the cutter can be adjusted from 75 to 330 angles according to the cutting requirements and is equipped with 160 angles swivelling assist handle for complex workplaces.
Wet Saw for Stone Cutting 12000W - 16" Electric Concrete Cutter Circular Saw, Concrete Cutting Saw, Water Fed Dust Suppression for Rebar/Marble/Concrete
1. 12000W Brushless Motor: 360° heat dissipation, 3000-4000RPM cuts 2m brick wall in 3 mins (30% more efficient). 2Ã16-inch diamond blades prevent jamming on hard materials.
5% discount
YUCHENGTECH 5800W Wall Chaser Wall Groove Cutting Machine Electric Wall Chaser Grooving Cutting Machine With Infrared Sighting Line 110V (17.5in and 5.5in)
1.ãUpgrade high power cutting processã: Upgrade 5800W high-purity copper motor, stronger and more stable power, thickened diamond saw blade, diamond material saw blade, sharp and durable, time-saving and labor-saving slotting.
QYLTTDM Electric Concrete Saw 9800W, 16" Professional Wall Cutting Saw, with Water Fed Dust Suppression, Cut Depth11.81, High Strength Diamond Cutter Head, for Granite, Stone, Brick, Marble, Concrete
Dust-Free Cutting: This electric concrete cutter is equipped with an intelligent water pump and accompanying water pipe. During grooving, the pump automatically adds water to the saw blade, reducing blade temperature, extending blade life, and reducing debris. It meets a variety of construction cutting needs.
6% discount
Wall Groove Cutting Machine, 2800W Slotting Machine Wall Chaser, 110V Electric Grooving Concrete Cutter, Brick Slotting Groover with Laser and Blades, Max grooving depth and Width 1.42in x 1.34in
ãDust-free Groovingã9.8 feet hose water pump, fast water supply, improve cutting efficiency, reduce dust splashing during cutting, reduce the temperature of the saw blade while prolonging its service life, protect the user's health. You can also connect it to a vacuum cleaner.
220V 7500R/Min High Quality Electric Multifunction Wall Groove Cutting Machine Slotting Machine Wall Chaser Machine for Granite Marble Steel Concrete 1900W
One time molding: fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases .Without any auxiliary tools and the second process. Cutting groove depth can be randomly controlled.
Ring Concrete Saw, Concrete Saw, 220V/8800W Concrete Cutter Saw, Brushless Electric Wall Grooving Cutting Machine Chaser, With Water Fed Dust Suppression for Slotting Brick Granite Marble Concrete Gro
ãRing Cutting SawãThe new Ring Cutting Saw adopts a unique ring saw blade, which is made of sturdy diamond. Greatly increases the cutting speed, keeps the cutting surface flat and improves the quality of work. Makes cutting as easy as cutting butter.
IOUSSJC Gas Concrete Cutter, 13 inch Circular Saw with 4 in Cutting Depth, Demo Saw for Stones, Asphalt Roadbeds, Granite with Hose, Water Valve
High-quality Material: This concrete cutter is made of high-quality plastic and aluminum, which is strong, durable, wear-resistant, and not easy to deform.
Wall Grooving Machine 1100W Electric Brick Wall Chaser Handheld Channels Cutter Concrete Cutting Machine for Cutting Slotting Marble Concrete Grooves
ãProfessional 1100W Wall Chaser for Precise GroovingãThis commercial-grade concrete cutter delivers powerful 2000 RPM performance at 110V/60Hz, designed to create clean channels in one pass without requiring additional tools. The self-feeding mechanism ensures smooth operation while cutting through tough masonry materials with professional results every time.
Electric Concrete Trowel Machine Wall Smoothing Polishing Machine with Extension Rod 110V Multi-function Sander Grinder Wall Plasterer Copper Motor 850W
ãProduct ParametersãVoltage: 110V; Power: 850W; Motor Type: Pure Copper Motor; Speed: 0-200RPM; Wiper diameter: 375mm/14.76in; Rod length: About 1m /39.37in
Concrete Saw, Electric Concrete Saw, Wall Chaser Cutting Machine, Electric Wall Grooving Cutting Machine Chaser, With Water Fed Dust Suppression for Slotting Brick Granite Marble Concrete Grooves (Co
ãRapid Prototyping No Dead CornersãOur concrete saw can fast automatic grooving wall tank, suitable for quick and clean cutting of wall chases. Supports deep wall cutting. Maximum depth: 48cm(18.89in).
XtremepowerUS 2600W 14" Concrete Saw Electric Cutter Wet/Dry Circular Concrete Cement Cut Off Floor Saw Water Feed Dust Port, Black/Red. Cutting Saw ONLY
The Circular Saw Is Lightweight And Powerful Machine With Superior Power-To-Weight Ratio With Exceptionally Low Vibrations Mean Less Strain And Maximized Productivity
110V 1100W Wall Groove Machine, Handheld Wall Chaser Brick Cement Slotting Machine Concrete Cutting Machine for Cutting Slotting Marble Concrete Grooves Red
Build to Last: This machine is made of good-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to abrasion, and impact.
Electric Concrete Saw 4800W Wall Chaser Concrete Cutter,Speed 5000r/min,Single-chip Concrete Cutting Machine for Brick, Concrete Wall, Granite, Marble
ãBuild to Lastã With a high-quality ABS housing, aluminum protective cover and baffle, and a hot-pressed diamond saw blade, the product is sturdy and resistant to deformation, ensuring stable power transmission and long service life.
Wall Slotted Machine, 3500W Electric Wall Chaser with Laser, Concrete Grooving Cutting Machine with 5 Blades, Wall Chaser for Concrete, Brick, Granite, Marble
ãSturdy and DurableãThis Product Is Made of High-quality Aluminum, Copper, Nylon, Steel, and Other Materials for Long Service Life, and the Diamond Blade Has High Sharpness and Durability for Cutting Various Materials.
5800W Wall Chaser 38mm/1.5" Cutting Width,Wall Groove Cutting Machine 52mm/2" Cutting Depth,Wall Slotting Machine With 8 Saw Blades 6.3" Diameter 5000r/Min,One-time Forming Dustless
1.ADJUSTABLE ELECTRIC WALL SLOTTING 160 MM - This electric concrete slotting machine features a one-time molding for quick and clean cutting of wall chases. And the groove width and depth are adjustable to meet the need of different wall chases. Maximum depth: 52 mm. Maximum width: 40 mm. Saw blade diameter: 160 mm.
Electric Wall Groove Cutting Machine, 1100W Concrete Cutting Slotting Machine, Wall Chaser with High-performance Cutting Head for Grooving Hollow Bricks Foam Turnings
ãAdjustable Designã The machine comes with an adjustable grooving depth(15-30mm), which can meet your different grooving demands.
Sunseota Wall Groove Cutting Machine 110V/220V Electric Wall Slotting Machine Electric Wall Chaser for Brick Granite Marble Concrete Dust Frees Operations Adjustable 15-40mm Grooving Dep Red-220V
â¹ã1100W High-power All-Copper MotorãSpeed 2000RPM. Excellent performance. wall chaser cutting machine features cooling vents and air intakes for rapid heat dissipation and overheat prevention. Lightweight walls, environmentally friendly walls, and hollow brick walls can be opened 2-5 meters per minute.
Wall Groove Cutting Machine,1100w Handheld Wall Chaser Concrete Cutting Slotting Machine Wall Chaser Slotting Machine Adjustable Design for Grooving Light Bricks Such As Hollow Bricks,Aerated Bricks
Pure Copper Motor&Dust Extraction Port: Wall Chaser the powerful motor has good electrical conductivity, strong transmission efficiency, slow temperature rise, and corrosion resistance, which make it run efficiently, stably, and durably. You can connect a dust bag or dust collector(not included) to reduce the harm of dust to operators and be more environmentally friendly.
Wall Line Cutter, 1100W 110V Wall Groove Cutting Machine 1600RPM Handheld Electric Groove Cutting Machine Wall Chaser 25mm Slot Width 15-30mm Slot Depth
ãBuild to Last: ãThis machine is made of high-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to abrasion, and impact.
110V 5800W Electric Concrete Saw, 16â Wall Concrete Cutter, Circular Saws with Saw Blade and Rolling Pulley, for Stone, Brick, Porcelain, Concrete
ãHigh-Power 16-Inch Concrete Cutter for Deep CutsãThis 4000W heavy-duty electric concrete saw features a robust pure copper motor, delivering a powerful 3000 RPM and a maximum cutting depth of 165mm (6.5 inches). Its 16-inch diamond saw blade is designed for demanding jobs, making it an ideal concrete saw 16 inch for professional and serious DIY projects.
Wall Groove Concrete Cutter, 110V 1100W Electric Handheld Floor Slotting Machine 1600R/MIN Wall Line Cutter for Hollow Bricks, Foam, Aerated Bricks, Adjustable Depth 15-30mm
ãPremium MaterialãOur wall groove cutting machine is made of high-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to corrosion, abrasion, and impact.
5-Inch 0.375" Width Wall Chaser Grooving Blade 7 Pieces, Diamond Mortar Removal Blade for Concrete Stone Brick Cement Mortar Removing Tuckpointing Blade Slotting Machine
wall groover
Electric Wall Groove Cutting Machine, Wall Chaser Concrete Brick Slotting Tool with 15-30mm Adjustable Depth, 25mm Slot Width, Lightweight Cement Wall Groover for Marble, Concrete, Red Brick
ãDurableãMade of high-quality aluminum, copper and plastic, it undergoes powder coating and painting processes, making it sturdy and durable. It is not easy to rust, corrosion or deformation, ensuring long-term use.
6% discount
VEVOR Electric Concrete Saw, 12 in, 1800 W Motor Circular Saw Cutter with Max. 4.5 in Adjustable Cutting Depth, Wet Disk Saw Cutter Includes Water Line, Pump and Blade, for Stone, Brick
A Clean Wet Cut: The VEVOR electric concrete saw offers a better cutting experience and reduces lung damage by preventing debris from spreading during cutting operations. It also includes a wet-cutting attachment, which provides direct water spraying and eliminates the need for one-handed watering while cutting. This improves operational security and makes cutting easier.
HaoYunNe Wall Grooving Machine with Water Pump and Pipe Concrete Saw Cutter Wall Groove Slotting Machine for Floor Brick Marble Rebar, 4000W, 6500RPM, with Toolbox
ãSize and MaterialãProduct length: 48cm/18.89 in; Handle width: 4cm/ 1.57 in; Toolbox size: 55*18*29cm/21.65*7.08*11.42in; Gross weight: 8.2kg/ 18.08 lbs. Mainly consists of aluminum and plastic body, pure copper motor and high strength dia-mo-nd alloy blade.Using spraying painting technology, with high strength, and wear resistance, ensuring your long-term use. Assembly Required.
1800W Electric Wall Chaser Concrete Cutter, Brick Cutter Granite Notcher Molding Slotting Machine Concrete Groove Cutting Machine with 2PCs Saw Blades for Brick Granite Marble Concrete
ãBuild to Lastã The 1800W Electric Wall Chaser Concrete Cutter is built to last, utilizing high-quality aluminum and plastic with a protective paint treatment. This electric concrete saw is designed to be wear-resistant and rust-proof, ensuring reliable performance for all your cutting needs.
HinLIaDa Wall Groove Cutting Machine, 1100W Concrete Cutting Slotting Machine Handheld Electric Brick Wall Chaser Electric Floor Wall Chaser Metalworking for Wall Slotting Machine, 35MM
Crafted for Longevity: This machine is constructed from premium aluminum, copper, and plastic, and undergoes plastic spraying and paint spraying treatments. As a result, itâs robust, long-lasting, and capable of withstanding corrosion, wear, and impacts.
JACKCHEN 14 Inches Concrete Saw Electric Powered 3000W Cut-Off Saw, 110V 4.8" Cut Depth and Electric Grinder With Diamond Blade
ãPOWERFUL Concrete Sawã: Heavy-duty, durable construction of electric concrete saw designed for cutting concrete, reinforced concrete. Impact frequency of 3000W/110V/, the JACKCHEN high performance electric powered cut off saw can help you improve efficiency and make your life better.
Molding Slotting Machine 110V Wall Chaser Concrete Cutter 4800W Electric Concrete Groove Cutting Machine with 5 Pieces Saw Blades for Cutting Brick Granite Marble Concrete 6500RPM
High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this molding slotting machine has a high load speed(6500rpm) , ensuring high efficiency and continuous use
AKSDSGA 4000W Electric Concrete Saw 14 Inch Concrete Cutter Saw Wet/Dry Circular Saws with Water Pump and 16.4ft Hose, Wall Chaser ConcreteCutter for Cutting Brick Wall Granite
Sturdy and Durable: This electric concrete saw is made of high-quality aluminum, copper, nylon, and carbon steel, for long service life, and the blade is made of diamond and carbon steel, which is sharp and durable and can cut various materials.
DUSNDULR Groove Cutting Machine, 4800W 110V Wall Chaser Concrete Cutter Molding Slotting Machine with 5 Pieces Saw Blades, Adjustable Slotting Depth & Width for Brick Granite Marble
ãHigh EfficiencyãAdopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
Wall Chaser Concrete Cutter, 110V 4800W Electric Wall Groove Cutting Machine, with 5 Pieces 5 Inch Saw Blades, for Brick Granite Marble Concrete, 42mm Cutting Width and Cutting Depth (Black)
ãADJUSTABLE GROOVINGãWall Chaser Concrete Cutter can accommodate up to 7 5.23-inch blades. The cutting depth and width can be adjusted by changing the size and quantity of the blades. The maximum depth is 1.61 "and the width is 1.65".
52CC Concrete Cutter Saw, 2-Stroke Gas Powered Disc Cutter/Circular Saw with 13in Blade, Dry & Wet Concrete Cutting Tool for Stone & Masonry Projects, 1.4KW/6500RPM
ãWet Cutting without Dirtã electric concrete saw provides a better cutting vision and less lung damage by avoiding the debris that spreads around in traditional cutting operations. Plus, it comes with a wet-cutting attachment, The water hose supplies water to the blade and the valve can control the amount of water to reduce dust, improving the performance and service life of the blade.
16" Electric Concrete Saw 4000W Wet/Dry Circular Saw with Water Pump and 16.4ft Water Hose Concrete Cutter for Brick Concrete Wall and Granite Max.Cutting Depth: 6.5in
[Efficient Cutting Capability] The electric concrete saw is equipped with a 4000W pure copper motor and a high speed of 3000rpm, with a sharp and durable saw blade made of diamond and carbon steel, it can easily cut concrete, red bricks and many other materials to improve work efficiency.
VICSEC 110V Electric Wall Chaser Groove Cutting Machine with Laser Guide Dust-Resistant Design Includes 5 5-Inch (133mm) Blades for Cutting Grooves in Brick Concrete Marble & Granite
Fast Concrete Chaser, No Dead Corners: This fast concrete chaser is perfect for quick and clean wall grooves. Ideal for concrete pouring walls, black-hearted red bricks, cinder bricks, and other super-hard walls. Maximum depth: 41 mm, maximum width: 42 mm. Saw blade diameter: 133 mm, inner hole: 20 mm.
YUCHENGTECH 4800W Wall Groove Cutting Machine Chaser 110V Wall Chaser Cutting Machine Electric Wall Chaser Grooving Cutting Machine Wall Grooving Cutter Machine With Infrared Sighting Line
1.ãMore powerful cutting powerã: 4800W pure copper motor, strong and stable power, time-saving and labor-saving slotting; thickened diamond saw blade, diamond material saw blade, sharp and durable.
Electric Concrete Saw 14 Inch 5800W Corded, 5.31" Cutting Depth with Water Cooling System - Professional Cement Cutter for Reinforced Concrete, Masonry, Jobsite Construction
Industrial 5800W Cutting Power: Copper-nickel-tin motor delivers 3800 RPM for demanding concrete cutting tasks. Handles reinforced concrete, granite, and steel up to 5.31 inches deep. Superior torque outperforms standard 3000W models for efficient grooving in construction and renovation projects
GSHIOIO 16" Electric Concrete Saw 4000W Wall Chaser Concrete Cutter Adjustable 6.5" Cutting Depth with Water Line, Water Pump Blade for Porcelain, Brick, Concrete Wall, Granite, Marble Cutting
Sturdy and Durable: This product is made of high-quality aluminum, copper, nylon, and carbon steel, for long service life, and the blade is made of diamond and carbon steel, which is sharp and durable and can cut various materials.
Wall Groove Concrete Cutter Slotting Machine 1100W, Adjustable Depth 15-30mm, 1600 RPM, Handheld Electric Floor Wall Chaser Brick Cement,Cutting Slotting Tool, for Hollow Bricks, Foam, Aerated Bricks
High-Efficiency Performance: Powered by a 1100W pure copper motor, this groove-cutting machine delivers strong transmission efficiency, slow temperature rise, and long-lasting durability, making it for heavy-duty grooving tasks.
XtremepowerUS 2200W Demolition Jack Hammer Flat Chisel Bull Point Chisel Bits Demo Chipping Hammer Concrete Pavement Breaker DIY Construction Concrete Floor Breaker Punch Drill
Wide Range of Application - XtremepowerUS demolition hammer gains itself good fame in demolition, chipping, trenching, breaking holes in concrete, block, brick, tile stucco, etc. You may find it applicable for various situations by its versatility, such as plumbing, mechanical installation, construction of water supply and drainage facilities, interior decoration, port facilities' construction, and other construction projects
1200W Electric Wall Paint Scraper Machine Handheld Surface Concrete Shovel with Steel Blades, Planer with Dust Vacuum Bag 1-3MM Depth Adjustable for Paint Putty Removal, Repair Tools
Electric Wall Planer - With tungsten steel multi-blade planner helps you save much time and effort. High-quality plastic and aluminum housing makes the machine durable. Comfortable double handles allow you to work stable and do long-term work without fatigue. With an axial blade on the side, you can easily and quickly plan left and right dead ends and corners.
ZGEXING Molding Slotting Machine Wall Chaser Concrete Cutter, 4800w Electric Concrete Groove Cutting Machine with 5 Pieces Saw Blades and Laser FunctionïŒfor Brick Granite Marble Concrete
High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
Wall Groove Cutting Machine, 1100W Electric Concrete Saw Handheld Wall Chaser Brick Cement Slotting Machine Red Brick Notcher Groover for Cement Brick Slotting Tool for Construction Renovation
ãBuild to Lastã: This machine is made of high-quality aluminum, copper, and plastic with plastic spray and paint spray processes, making it sturdy, durable, and resistant to corrosion, abrasion, and impact.
Wall Groove Cutting Machine, Handheld Wall Chaser Concrete Cutting Slotting Machine with Dust Extraction Port and Anti-Self-Locking Switch, Wall Chaser Slotting Machine Adjustable Grooving Depth
Wall Groove Cutting Machine: The machine comes with an adjustable grooving depth(15-30mm), which can meet your different grooving demands.
Electric 14 in Circular Saw Cutter with 4.8 in Cutting Depth, Wet/Dry Disk Saw Cutter Includes Water Line, Pump and Blade, for Stone, Brick, Porcelain, Concrete, 3500w cutting machine
ãCLEAN, DUST-FREE CUTTING FOR HEALTHIER WORKã:YOPUTETOOL electric concrete saw delivers a cleaner, safer cutting experience with its integrated wet-cutting system. The direct water spray attachment effectively suppresses dust, reducing airborne debris by up to 90% for improved lung protection. No more juggling a hose
5% discount
HIGOSPRO 14-Inch Electric Concrete Saw 3000W, 110V Cut-Off Saw with Diamond Blade, 4.8" Max Cutting Depth, Heavy-Duty Cement Grinder for Asphalt, Brick, Stone
ãPowerful Cutting Performanceã:This heavy-duty 3000W electric concrete saw delivers professional-grade power, effortlessly cutting through concrete, reinforced concrete, asphalt, and stone. With a no-load speed of 4200 RPM and a 4.8" max cutting depth, it handles demanding jobs with precision and speed. The included diamond blade ensures clean, efficient cuts right out of the box, making it ideal for construction, masonry, and renovation work
Virginia Abrasives 425-06026 - 2pc 14" High Speed Diamond Blade - Wet/Dry Saw Blades for Concrete - Multipurpose Tools for Grinders, Scroll Saws, Wall Chasers - Precision Diamond Blade
VERSATILE MEDIUM BOND BLADE: The Basic Diamond 425-06026, a 14" medium bond blade, excels with general purpose concrete, compatible with high speed and walk behind saws. Ideal for granites and river rock aggregates. Its 14" x .125" x 1"/20mm DP size,High speed delivering versatile cutting precision
Wall Chaser Machine 3500W Slotted Machine with Laser Guide 5000rpm Max Cutting Depth&Width 1.65x1.57" Concrete Cutting Machine with Water Pump&Carrying Case Wall Grooving Cutting Machine
Dust Splashing Prevention -- Our wall chaser machine can be connected to a water pump or vacuum cleaner (not included) to reduce dust splashing during slotting, protecting your health. The front protective cover also prevents the dust from splashing.
4800W 110V Electric Wall Groove Cutting Machine, Concrete Grooving Cutting Machine Wall Grooving Machine Channels Cutter with 5 x 5" Saw Blades for cut granite porcelain concrete marble red brick
High Efficiency: Adopting a 4800W all-copper motor and high-strength diamond alloy blades, this machine has a high load speed(6500rpm) and can slot at 90 ° without dead angles, ensuring high efficiency and continuous use without burning out.
Electric Wall Grooving Cutting Machine Chaser,110V 4800W Wall Chaser Concrete Cutter,7000rpm,Concrete Grooving Cutting Machine with 5 5In Saw Blades and Water Pump,with Laser Guide
Sturdy and Durable: This product is made of high-quality aluminum, copper, nylon, steel, and other materials for long service life, and the diamond blade has high sharpness and durability for cutting various materials.
VICSEC 110V 6800W Electric Concrete Saw 14" Wet/Dry Circular Saw with 135 Saw Blade and Rolling Pulley Masonry Cutting Tool for Granite, Porcelain, Wood,Concrete, Stone, etc.
ãPowerful motor and heat dissipation functionã: This new circular saw concrete cutting machine has a power of 6800W and a motor speed of 4600r/min, which greatly improves work efficiency, and has 360° all-round heat dissipation, so there is no need to worry about damaging the machine under high-intensity operations,safe to use.
16" Electric Concrete Saw with Water Fed Dust Suppression & Rolling Pulley, 4000W Powerful Wall Chaser Concrete Cutter Masonry Circular Cut Off Saw for Brick Granite Porcelain Wood Stone
Dust-free Slotting: The water pump with a 16.4ft hose can supply water quickly, improve cutting efficiency, reduce dust splashing during cutting, lower the temperature of the saw blade while extending its service life, and protect your health
16'' Electric Concrete Saw, 5800W Wet Dry Saws Cutter with 6.5in Cutting Depth, Circular Saws Cutter with Water Pipe/Water Pump/Blade for Concrete, Granite, Brick, Porcelain, 3000RPM
High Efficiency: With 4000W strong power, 3000rpm high speed, manually adjustable slot depth, and thickened sharp blades of 16.14" in diameter, it can do one-time grooving with a maximum grooving depth of 6.5" on the wall without secondary processing.
Concrete Saw, 16 Inch Electric Circular Saw Cutter with Dust-Free Slotting Adjustable Depth & Auxiliary Pulleys Wet/Dry Disk Cutter for Stone Concrete Granite Red Brick Ceramics Floors Tarmac Etc
Dust-free Slotting: The water pump with a 16.4ft hose can supply water quickly, improve cutting efficiency, reduce dust splashing during cutting, lower the temperature of the saw blade while extending its service life, and protect your health.
Electric Concrete Saw, 16" Wet/Dry Disk Saw Cutter 4000W Circular Concrete with Water Line, Water Pump and Blade 6.5" Cutting Depth for Stone, Brick, Porcelain, Concrete
ãSturdy and Durableã: This product is made of high-quality aluminum, copper, nylon, and carbon steel, for long service life, and the blade is made of diamond and carbon steel, which is sharp and durable and can cut various materials.
14Inch 3000W Concrete Saw, 110V 3800Rpm Electric Portable Circular Saws, 5.31inch Max. Cutting DepthWood Cutter-Saw w/Locking Switch, Splash Cover, Connector & Water Suction Pump, For Workshops
ã110V 3800Rpm Electric Portable Circular SawsãWith a maximum load power of 5800W and a maximum speed of 3800RPM, the copper-nickel-tin motor provides you with excellent performance and efficient grooving results. It also has a depth adjustment switch that allows you to adjust the saw by changing the height of the base plate for a maximum depth of cut of 5.31 inches.
16" Electric Concrete Saw,3200W 15Amp Motor Wet Corded Circular Saw with Max 6.4" Adjustable Cutting Depth,Wet Disk Saws Cutter with Water Line, Pump, Blade for Granite, Brick, Stone
Powerful Electric Motor: This Electric Concrete Saw has 3200 W motor with 3200 RPM running speed making the cutting fast and smooth. The motor features high-temperature resistance, sustainable operation, and no fumes. Thus, our 16" circular saw is more efficient for your work
XUFOPLY Wall Groove Cutting Machine, 4800W 6500rpm Slotting Machine Wall Chaser Concrete Cutter with 5 Pieces 5.23in Saw Blades, for Brick Granite Marble Concrete 42MM Cutting Width/41MM Cutting Depth
ãPOWERFUL AND EFFICIENTã: Boasts a 4800W all-copper motor with a no-load speed of 6500rpm, ensuring high-efficiency cutting of concrete walls, bricks, and wood.
110V Electric Concrete Saw, 14" 3000W Circular Saws, 3800r/min 5.31in Max Cutting Depth Pure Copper Motor Stone Cutter-Saw W/Water Suction Pump Home Cutting-Machine For Wood, Marble
ã14" 3000W Circular SawsãIt is driven by a powerful 3000-watt copper motor with a speed of up to 3,800 r/min and a maximum cutting depth of up to 5.31 inches , ensuring that it cuts efficiently and saves you time and effort.
Concrete Saw, 110V 4000W Powerful Electric Concrete Circular Saw, 3000RPM High Speed Cement Cutter Machine with Water Pump and Rolling Pulley, 16-Inch Electric Cutting Tool for Stone Brick
DURABLE: The electric concrete saw is made of high quality aluminum, copper, nylon, carbon steel, long service life, the blade is made of diamond, carbon steel material, sharp and durable, can cut a variety of materials
BFDIEEM Electric Concrete Saw, 14 in Circular S aw Cutter with, Wet/Dry Disk Saw Cutter Includes Water Line, Pump and Blade, for Stone, Brick, Porcelain, Concrete, 3000W 3800r/min
Material: Head Shell Aluminum, Diamond Saw Blade, Motor Iron And Copper, Gear Steel,Cutting Depth: 50-130mm,Cutting Width: 3.2mm,Rated Power: 3000W,Load Power: 5800W,Rated Speed: 3800R/Min
VEVOR Wall Smoother, 900W Electric Tool with 12 Sanding Discs, 800 to 1800 RPM Speed, 3 Vacuum Hoses, Collapsible for Ceiling Use, Dual LED Lights, Telescoping Handle, and Built-in Dust Collector
Wall Sanding Expert: The Wall Smoother is ideal for walls painted with latex paint, oil paint, diatomaceous earth, putty, and spackle, suitable for lime and putty wall. (For old popcorn ceilings, you must first use a handheld electric trowel polishing machine to smooth out the bumps, then use our drywall sander to sand it flat.)
trggvvrt Electric Concrete Cutting Machine, 14in 3000W Dust-free Slotting Motor Circular Saw Cutter, 1.97-5.12in Cutting Depth Adjustable, Concrete Cutter for Granite, Stone, Concrete
ãSturdy and Durableã Made from high-class aluminum, diamond, iron, copper, high-carbon steel, and steel with a sandblasting process, this concrete saw is wear-resistant, corrosion-resistant, rust-resistant, and not easy to deform, ensuring durability. This saw is simple in structure, equipped with complete accessories and a manual, and easy to install. You can finish the installation by yourself.
4000W 14'' Electric Concrete Saw Wet/Dry, 3000RPM Cut Off Saw with Water Fed Dust Suppression Rolling Pulley, with Diamond Blade, 5.31" Cutting Depth, Water Pump for Cutting, Brick, Stone, Tile
4000W Pure Copper Motor: Delivers 3000 RPM high-speed cutting with a 13.78" diamond blade for effortless slicing through concrete, brick, stone, and tile.
